7

I'm just starting some Cisco training and I would like to know if there are any freely available simulators available.

7 Answers 7

4

GNS Is the best one out there that i've been able to find. You'll have to get your hands on your own IOS images though.

I was once told of someone using it as a production router ... don't know why but they were.

3
  • I definitely have to agree. GNS is great for learning or playing with Cisco stuff. The only downside is that it doesn't support switches too well..
    – Vitaliy
    Feb 5, 2010 at 17:56
  • Nice! I was looking for something like this a while ago. Now to just get it working...
    – MikeyB
    Feb 10, 2010 at 16:01
  • @Vitaliy Can you please elaborate what is not supported? Thank You!
    – Eugene S
    Apr 3, 2012 at 9:46
3

if you can "find" **cough* * * cough * a copy of Packet Tracer out there, it will allow you to directly configure the routers through IOS, as well as add or remove modules from the hardware. not to mention it includes more than just routers, you can design logical and physical networks, that connect, and send packets... its crazy, check it out

http://www.cisco.com/web/learning/netacad/packet_tracer/packet_tracer_03-4_web.html

1

You can try zebra or quagga (zebra's fork), with cisco sintax but not all cisco ios features.

0

If you google around you can find copies of something called Cisco Packet Tracer. It's reportedly very good.

Also, if you're looking for Cisco certification stuff, you might want to take a look at 9tut.com . They have simulations and practice questions.

0

Zypher mentioned GNS, but I actually found it be a little bit flakey last time I tried it. I recommend you go straight to the command line text interface of dynamips called dynagen. On their page is a good tutorial on how to use it, it might have a slightly steeper learning curve, but works better in the end I think.

If you do go with GNS I wrote a tutorial here to which I never wrote the second part, but the second part isn't really needed.

For all these you are going to need the IOS images which Zypher mentioned (Which we can't tell you how to get if you don't already have a valid Cisco service contract).

0

Do you have access to the "Cisco Web Academy" since you are starting your training? if so just grab packet tracer from in there.

0

If you really are 'just starting' I highly recommend you don't spend too much time with a simulator/emulator for CCNA/CCENT exams, They aren't very focused on Command Syntax, and moreso on Subnetting, Subnettting, NAT concepts and Subnetting.

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .