2

I'm having a little server with Windows Small Business Server 2003. I'm using RAID1, via a HighPoint Rocket RAID 1640 RAID-card, using two harddrives.

This week the server alarmed, and durig reboot I got the error-message Broken Mirroring (User Manual page 30). I had a few alternatives (see the manual), first I tried Continue, but the server restarted during boot. Next time I took Power Off, and replaced the oldest harddrive with a new one, and when I booted, I selected Rebuild. Then I selected the new harddrive to be the new one. The rebuild-procedure started and a progress bar at 0% showed up, but after a few seconds I got the message Copy Failed!, then the server booted and Windows Server started. Now it works fine.

But I guess that I'm just using one harddrive now, and it's not mirrored. I haven't touched the server since then (two days ago). What should I do now? I have no experience of this situation.

Anyone that have some guidance?

2
  • Does the controller still show the array as degraded?
    – Boden
    Feb 3, 2010 at 23:20
  • No, it seams to work fine now, except that it is crashing very often.
    – Jonas
    Feb 7, 2010 at 8:33

2 Answers 2

0

Most RAID controllers will show the status of the array and its member drives during the POST process at boot. They usually have a way (Ctrl+I and Ctrl+M are popular) to access the RAID management with options for checking consistency and rebuilding drives. I would try to get into that and perform the rebuild from the firmware tools before the OS loads and the system is busy.

1
  • Yes, that is what I tried.
    – Jonas
    Feb 7, 2010 at 8:32
0

The RAID controller seams to work fine now. I haven't done anything more with it. Case closed.

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .