1

I'm trying to set up opsview (Nagios) on a CentOS 5 server running perl 5.8.9

When I try to start it, it can't find RRDs.pm. Turns out, neither can I. It's not on CPAN and I've been unable to determine what package would provide it. yum provides "*/RRDs.pm" doesn't return any results.

Edit: so we've established that it should come with the perl-rrdtool package, but unfortunately hasn't. Where do I go from here?

1

4 Answers 4

1

RRDs.pm should be provided by perl-rrdtool, but you indicate that you've already installed this program.

Your script can't find RRDs.pm, but RRDs.pm may still be installed on your system, just not in a place where PERL expects to find it.

What do one of these commands tell you?

(You might need to update the locate database first, with /etc/cron.daily/mlocate or a similar cron command)

locate RRDs.pm

Or:

find / -type f -name RRDs.pm
4
  • I did find an old RRDs.pm in under the perl 5.8.8 libs, but after copying it into the 5.8.9 tree it jsut segfaults.
    – Brad Mace
    Oct 7, 2010 at 21:27
  • I pointed you to the i386 files (I corrected the link). You might have the x86_64 architecture. Make sure you are downloading the correct RPM for your architecture: rpmfind.net/linux/rpm2html/search.php?query=perl-rrdtool Oct 7, 2010 at 21:41
  • CentOS 5.5 ships with Perl 5.8.8 by default. If you are using Perl 5.8.9, then it sounds like you are starting to go the custom route. A simpler solution would be to stick with the default version of Perl, unless you really need a newer version of Perl. Oct 7, 2010 at 21:50
  • This time you've hit it. Running strings against the rpm it appears to be hardcoded to install under perl 5.8.8. I've reverted to 5.8.8 and it's now working! Hopefully there wasn't a good reason I'd upgraded to 5.8.9
    – Brad Mace
    Oct 7, 2010 at 22:26
2

Running the following fixed this issue for me on RHEL6.

yum install rrdtool-perl
1
  • 2
    This answer will be better if you also explain what the differences between those two packages are.
    – kasperd
    May 10, 2015 at 8:05
0

You have to install rrdtool, CentOS doesn't provide this package by default but you can use Dag Wiers' repository

$ cd /etc/yum.repos.d
$ vim dag.repo

insert the following lines:

[dag]
name=Dag RPM Repository
baseurl=http://apt.sw.be/redhat/el$releasever/en/$basearch/dag
gpgcheck=1
gpgkey=http://dag.wieers.com/rpm/packages/RPM-GPG-KEY.dag.txt
enabled=1

and :wq (save) the file. After this, just install the package via yum.

$ yum install rrdtool
1
  • Unfortunately I already had rrdtool-1.4.4-1.el5.rf.i386 installed from the CentOS repository, so that's not it either
    – Brad Mace
    Oct 7, 2010 at 21:09
-1
Loaded plugins: langpacks, product-id, subscription-manager
This system is registered to Red Hat Subscription Management, but is not receiving updates. You can use subscription-manager to assign subscriptions.
http://apt.sw.be/redhat/el7Server/en/x86_64/dag/repodata/repomd.xml: [Errno 14] curl#6 - "Could not resolve host: apt.sw.be; Name or service not known"
Trying other mirror.

One of the configured repositories failed (Dag RPM Repository), and yum doesn't have enough cached data to continue. At this point the only safe thing yum can do is fail. There are a few ways to work "fix" this:

  1. Contact the upstream for the repository and get them to fix the problem.

  2. Reconfigure the baseurl/etc. for the repository, to point to a working upstream. This is most often useful if you are using a newer distribution release than is supported by the repository (and the packages for the previous distribution release still work).

  3. Disable the repository, so yum won't use it by default. Yum will then just ignore the repository until you permanently enable it again or use --enablerepo for temporary usage:

        yum-config-manager --disable dag
    
  4. Configure the failing repository to be skipped, if it is unavailable. Note that yum will try to contact the repo. when it runs most commands, so will have to try and fail each time (and thus. yum will be be much slower). If it is a very temporary problem though, this is often a nice compromise:

        yum-config-manager --save --setopt=dag.skip_if_unavailable=true
    

failure: repodata/repomd.xml from dag: [Errno 256] No more mirrors to try. http://apt.sw.be/redhat/el7Server/en/x86_64/dag/repodata/repomd.xml: [Errno 14] curl#6 - "Could not resolve host: apt.sw.be; Name or service not known"

1
  • This in now way attempts to answer the posted question.
    – sysadmin1138
    Feb 22, 2017 at 14:13

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .