3

Good day!

We need to connect an STB device over wi-fi to the router. STB uses multicast only. Using udpxy is not possible. Original firmware forwards multicast over wi-fi using mac changing technique. I.e. router changes destination mac address from multicast to unicast mac address of multicast group subscriber. On Asus routers this feature is called "Wireless Multicast Forwarding (WMF)". On Mikrotik it's called "Multicast-helper". So, the question is: Can I enable this on TP-link wr741nd with ОpenWrt? It works in original firmware. How is it implemented? Is it a feature of wi-fi chip driver or kernel patch or patch of igmpproxy or something else?

Improve this question

1 Answer 1

Reset to default
2

The OpenWrt wiki had an answer:

With IGMP snooping, multicast forwarding is disabled for bridges. One pure bridge solution is to disable multicast_snooping.

Add the following in /etc/rc.local

echo "0" > /sys/devices/virtual/net/br-lan/bridge/multicast_snooping

Replace br-lan with your actual bridge interface, sometimes also called br0.

This will forward all multicast packets to all ports on your bridge, making igmpproxy or udpxy unnecessary. In large networks, this may not be desirable.

Also remember that multicast over Wi-Fi is a performance killer.

Improve this answer
1
  • 1
    It is not what i need. I do not add wifi interface into bridge. Multicast are routed from vlan interface to wifi. Igmpproxy irrelevant to my problem. I need to startup mechanism of mac address retranslation.
    – igorv
    Feb 19, 2014 at 11:41

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .