3

Say I've got.. 5 servers, each server has a partition with 50GB's of storage. Is it possible for me to combine these 5 partitions and then mount them as one on a 6th server?

3
  • YOu can mount other Servers' FS anywhere using NFS but you won't see it as 1 only mount point Aug 31, 2011 at 19:49
  • There's no way to make it visible as just the one mount point? e.g have all the other partitions mounted to /home/ on the 6th server?
    – Ulkmun
    Aug 31, 2011 at 19:52
  • I don't think so (but i could be wrong) .. because you can mount two NFS (or partition , LVM, harddrive ) in the same mounting point Aug 31, 2011 at 19:54

5 Answers 5

4

Absolutely. On the flip-side... this is a bit of a dangerous thing to do... as any failure on any of those 5 servers can mean total data-loss/corruption. (the 5 servers behave as a disk. 5 disks spanned into 1 volume can have very bad outcome if one of those disks fails or becomes non-responsive)

This is the area of "Clustered File Systems" and there's a bunch of different ways to implement it... all with their own pros & cons.

some CFS strategies are block-based (the "volumes" are stored on each server as a block-device" and some are file-system level only. (the "volumes" only pay attention to "files" and pass the data to the underlying file-system to keep track of the blocks)

You can do a wikipedia search for "Clustered File Systems" and "Distributed File Systems" for a list of various flavors... and get some information about how to implement them.

1

Consider using GlusterFS, it has an ability to combine several subvolumes into one volume. This feature is called "unify translator".

1

Yes its possible.

Distributed File systems: http://en.wikipedia.org/wiki/Distributed_file_system

Helpful answers here (possible duplicate): Which Distributed File System as a backend for Cloud Computing?

0

iSCSI can do this at the block level while being FS agnostic, but has the same drawback as a DFS or CFS, as @TheCompWiz stated.

-2

with each of the partition having being served as an iscsi disk, you can make a raid filesystem on the client machine. raid5 would give you single disk failure tolerance. Raid six gives you two disk failure tolerance. but the throughput would never be as fast as having the disks locally connected over SATA/SAS

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .