1

Here's the layout I have; I'm using Software RAID10, LVM, and Encryption:

LVM VG vg0, LV main - 2.0 TB Linux device-mapper (linear)
    #1              2.0 TB    K    crypto       (vg0-main_crypt)
Encrypted volume (vg0-main_crypt) - 2.0TB Linux device-mapper (linear)
                   61.4 kB         unusable
    #1              2.0 TB    f    ext4         /
LVM VG vg0, LV swap - 10.1GB Linux device-mapper (linear)
    #1             10.1 GB    K    crypto       (vg0-swap_crypt)
Encrypted volume (vg0-swap_crypt) - 2.0TB Linux device-mapper (linear)
                   61.4 kB         unusable
    #1             10.1 GB    f    swap         swap
                   65.5 kB         unusable
RAID10 device #0 - 20.2 GB Software RAID device
    #1             20.2 GB    K    lvm
                  131.1 kB         unusable
RAID10 device #1 - 2.0 TB Software RAID device
    #1              2.0 TB    K    lvm
                  131.1 kB         unusable
RAID1 device #2 - 298.8 MB Unknown
    #1            298.8 MB    K    ext4         /boot     
SCSI1 (0,0,0) (sdb) - 16.0 GB Verbatim STORE N GO
    #1   primary   16.0 GB  B      fat32
SCSI2 (0,0,0) (sdb) - 1.0 TB ATA WDC WD1002FAEX-0
    #1   primary  298.8 MB  B K    raid
    #1   primary   10.1 GB    K    raid
    #1   primary  989.8 GB    K    raid
SCSI3 (0,0,0) (sdc) - 1.0 TB ATA WDC WD1002FAEX-0
    #1   primary  298.8 MB  B K    raid
    #1   primary   10.1 GB    K    raid
    #1   primary  989.8 GB    K    raid
SCSI4 (0,0,0) (sdd) - 1.0 TB ATA WDC WD1002FAEX-0
    #1   primary  298.8 MB  B K    raid
    #1   primary   10.1 GB    K    raid
    #1   primary  989.8 GB    K    raid
SCSI5 (0,0,0) (sde) - 1.0 TB ATA WDC WD1001FALS-7
    #1   primary  298.8 MB  B K    raid
    #1   primary   10.1 GB    K    raid
    #1   primary  989.8 GB    K    raid

The error I'm getting now is:

The attempt to mount a file system with type swap in Encrypted volume (vg0-swap_crypt) at none failed.

What am I doing wrong? When I had the swap unencrypted it said that I should encrypt it because it's unsafe not to (if I'm encrypting the rest).

1 Answer 1

2

Try rearranging to only have 2 RAID partitions -- 1 for /boot and 1 for the rest of the space; the partition with the remaining space gets a single encrypted volume. The encrypted volume has an LVM group on top of it with 2 LVM volumes, swap and /

See my previous question for a little more detail.

1
  • You are a lifesaver. I wish I could upvote you more...
    – user29600
    May 11, 2011 at 18:45

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .