0

I administer a large number of servers, and I have this problem only with Ubuntu 10.04 LTS: I run a server under normal load (say load average 3.0 on an 8-core server). The "top" command shows processes taking certain % of CPU that cause this load average: say

PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND
11008 mysql     20   0 25.9g  22g 5496 S   67 76.0 643539:38 mysqld  

ps -o pcpu,pid -p11008
%CPU   PID
53.1 11008

, everything is consistent.

The all of the sudden, the process causing the load average disappears from "top", but the process continues to run normally (albeit with a slight performance decrease), and the system load average becomes somewhat higher. The output of ps -o pcpu becomes bogus:

# ps -o pcpu,pid -p11008
%CPU      PID
317910278 1587

This happened to at least 5 different severs (different brand new IBM System X hardware), each running different software: one httpd 2.2, one mysqld 5.1, and one Twisted Python TCP servers. Each time the kernel was between 2.6.32-32-server and 2.6.32-40-server. I updated some machines to 2.6.32-41-server, and it has not happened on those yet, but the bug is rare (once every 60 days or so).

This is from an affected machine:

top - 10:39:06 up 73 days, 17:57,  3 users,  load average: 6.62, 5.60, 5.34
Tasks: 207 total,   2 running, 205 sleeping,   0 stopped,   0 zombie
Cpu(s): 11.4%us, 18.0%sy,  0.0%ni, 66.3%id,  4.3%wa,  0.0%hi,  0.0%si,  0.0%st
Mem:  74341464k total, 71985004k used,  2356460k free,   236456k buffers
Swap:  3906552k total,      328k used,  3906224k free, 24838212k cached

PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND                                                                
805 root      20   0     0    0    0 S    3  0.0   1493:09 fct0-worker                                                            
982 root      20   0     0    0    0 S    1  0.0 111:35.05 fioa-data-groom                                                        
914 root      20   0     0    0    0 S    0  0.0 884:42.71 fct1-worker                                                            
1068 root      20   0 19364 1496 1060 R    0  0.0   0:00.02 top             

Nothing causing high load is showing on top, but I have two highly loaded mysqld instances on it, that suddenly show crazy %CPU:

#ps -o pcpu,pid,cmd -p1587
%CPU   PID CMD
317713124 1587 /nail/encap/mysql-5.1.60/libexec/mysqld

and

#ps -o pcpu,pid,cmd -p1624
%CPU   PID CMD
2802  1624 /nail/encap/mysql-5.1.60/libexec/mysqld

Here are the numbers from

 # cat /proc/1587/stat
 1587 (mysqld) S 1212 1088 1088 0 -1 4202752 14307313 0 162 0 85773299069     4611685932654088833 0 0 20 0 52 0 3549 27255418880 5483524 18446744073709551615 4194304 11111617 140733749236976 140733749235984 8858659 0 552967 4102 26345 18446744073709551615 0 0 17 5 0 0 0 0 0

the 14th and 15th numbers according to

man proc 

are supposed to be

utime %lu   Amount of time that this process has been scheduled in user mode, measured in clock ticks  (divide  by
                      sysconf(_SC_CLK_TCK).   This  includes  guest  time, guest_time (time spent running a virtual CPU, see
                      below), so that applications that are not aware of the guest time field do not  lose  that  time  from
                      their calculations.

stime %lu   Amount of time that this process has been scheduled in kernel mode, measured in clock ticks (divide by
                      sysconf(_SC_CLK_TCK).

On a normal server, these numbers are advancing, every time I check the /proc/PID/stat. On a buggy server, these numbers are stuck at a ridiculously high value like 4611685932654088833, and it's not changing.

Has anyone encountered this bug?

1
  • I have the same problem (almost) on two different servers. In both cases, the utime and stime in /proc/pid/stat are stuck at zero for all processes.
    – user147739
    Nov 30, 2012 at 9:54

1 Answer 1

0

I guess this might be a bug in procps package instead of kernel. Not seen the bug you described, but similar bugs over the years in various distros, yes.

If this is about procps, is there a bugfix available for Ubuntu 10.04 LTS? No idea, have not used it in a long, long time, and even the last time was in a galaxy far, far away...

1
  • I suspect a kernel bug, since the 13th and 14th numbers (utime and stime) in /proc/<PID>/stat are very strange: they are larger by 5 orders of magnitude than on a normal server, and not advancing, while the process is running. Jul 10, 2012 at 18:22

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .