1

I have a set of ESX 3.5 servers in 2 different datacenters. One is DR, one is production. They are on the same vlan and so I can access any of them on the private network from my vCenter server. Last month, as a learning experience (I hadn't dealt with ESX much before), I updated the DR server.

Other than finding out that a couple of bundles had to be installed manually in order to get the rest to install from vCenter, it went off without a hitch.

Now, I'm trying to do the same for our production servers and it is not working. I've googled around for the error I get during scan, and investigate loads of different solutions (editing the integrity file, checking DNS, etc) -- I did install the 2 bundles that had to be installed manually already -- but scan from vCenter is just not working.

Side note: I did just scan the DR server again and that scan works fine so shouldn't be a problem with vCenter that has cropped up recently -- it has to be something else.

The error I get is:

Patch metadata for (servername) missing. Please download updates metadata first.
Failed to scan (servername) for updates.

I'm all out of ideas on how to make this work, so any help would be hugely appreciated.

1 Answer 1

1

Managed to get this working for 3 of the 4 hosts, thus far. The last one has hardware issues and will likely be successful once that is corrected.

After a lot of rigimarole, it was determined that the hosts were running different patch levels, but yet somehow had all been successfully added to a cluster. In trying to troubleshoot a problem where one of the hosts wouldn't reconfigure for HA, we went ahead and updated (manually) to 3.5 Update 5a, and then manually installed the following two bundles:

ESX350-201012404-BG
ESX350-201012410-BG

After rebooting the host and the vCenter server, we were able to add the baseline again and successfully scan for updates.

0

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .