13

I have some Adaptec SAS raid controllers and the fanout cable comes with an extra cable called a SideBand but I am curious what it does?

I know it plugs into the backplane, but other than that I can't seem to find anything on google

The adaptec site refers to it as "SFF-8448 sideband signals" and there is no mention of it in the manuals or their site.

Improve this question

2 Answers 2

Reset to default
7

The sideband cables are used to connect the controller to a managed backplane or disk enclosure, so that it can monitor the controller as well as the disks.

Improve this answer
2
  • 3
    That's kind of obvious, I have figured that out. But what specifically does it do? Thanks.
    – Chad Grant
    May 7, 2009 at 9:36
  • 2
    It lets the backplane monitor the status of the Raid controller and send alerts should there be a problem. What else do you want to know ? The specifics of how it talks to the controller?
    – Sam Cogan
    May 7, 2009 at 9:58
12

This PDF document "SFF-8448 Specification for SAS Sideband Signal Assignments", (Rev. 05; September 2, 2005) on Seagate's FTP Server defines the signal assignments for known Vendor specific sidebands thata are defined in SAS (Serial Attached SCSI).

On page 12 there is a description of the Sideband Assignments.

Improve this answer

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .