0

Hy!

I got an Openvpn server on Linux and use it to route all ipv4 traffic from my clients (win7,android, pfsense etc). I finally want to really understand the routing thing, although it works, but more because my server .conf was made upon trial and error :)

What i dont get, is which combination of options really is needed - what do those push things do other than the option "redirect-gateway def1" (which is explained on the openvpn man)? is it true, that i cant ommit redirect-gateway def1 because otherwise the traffic of the tunnel would be routed through the tunnel..?

What is currently working is the following set of route options on the server.conf (besides the other optiones, like tun device, client etc):

server 10.10.0.0 255.255.255.0 #ok, i assume thats needed for the client to find out which ip to get

push "redirect-gateway def1" # i get it, but it dont work on android or mac - there i have to set a program option "route all gateway through the vpn" for the tunnel to act as default-route

push "dhcp-option DNS 8.8.8.8" # as dnsmasq doesnt work i assume i need this for all dns beeing made through another (google) server

push "route 10.10.0.1"# is this helpful? it doesnt seem wo brake things, but shouldnt this be executed by redirect-gateway def1 already? for the time beeing, on my win7 client if i omit this it also works. but with or without this option i dont have a default-ipv4-gateway entry on the tap device in win7, although traffic is routed through the tunnel..

another thing i dont get is the dhcp is set to 10.10.0.5 if the clients get the ip 10.10.0.6. but theres notghin on 10.10.0.5, where does this come from?

oh man, plz help me understanding this, my routing knowledge is little to no... thx!

p.s. when i finally got this, i want to adress the constant "Authenticate/Decrypt packet error: bad packet ID (may be a replay): [ #961 ] " errors i get, already tried fragment 1300 mssfix but doesnt seem to help, although netalyzr said my mtu is 1376 and before that options it said that i cant send or receive fragmented packets. i suspect my provider masses with the udp packets..

edit: here is my server.conf

port 123 
client-to-client
proto udp

dev tun0

ca *.crt
cert *.crt
key *.key
dh *.pem

server 10.10.0.0 255.255.255.0
ifconfig-pool-persist ipp.txt

duplicate-cn
keepalive 10 120

push "redirect-gateway def1"
push "dhcp-option DNS 8.8.8.8"
push "dhcp-option gateway 10.10.0.1"

max-clients 5
client-to-client

fragment 1300
mssfix

edit: route commands now clear, thanks, oversaw the "server" part in the openvpn man.

now i have the following issues:

in an attempt to debug the connection (udp connection always gets packet replay) I built a tcp tunnel (based on the above config, just switched to tap0 on the server) and as soon as a download from the openvpn client starts i get the following log output:

"MULTI: packet dropped due to output saturation (multi_process_incoming_tun)"

so i added:

tcp-queue-limit 128

that led to less of the message, so i increased to

tcp-queue-limit 256

this leads to a connection drop. first it outputs some of these:

MBUF: mbuf packet dropped

then

write TCPv4_SERVER: Broken pipe (code=32)

then

Connection reset, restarting [0]

so i appended

bcast-buffers = 4096

which results in no more messages, but the speed still is dismal. also i dont know wether thats just a fix for some minor downloads and if it works stable with ongoing downloads or if the buffer fills up and it reconnects, so might be more broken than fixed..

whe using the udp tunnel i get nearly twice download speed and repeatedly this log message:

Authenticate/Decrypt packet error: bad packet ID (may be a replay): [ #650 ]

for example, while doing an oakla speedtest run, i get around 3 replay warnings during the download test and 5-6 during the upload test.

What can I do further improve the tunnel? thx!

edit: changed the title, so it matches the problem more.

edit: now using a 1 GB file from my openvpn server to test download speed instead of oakla and i have 16mbit over tcp, no error so far edit: ok, its not routed through the tunnel, it downloads directly - i assume thats because of the direct route to the openvpn server that is needed for the openvpn client.

1
  • First, it would be helpful if you posted your full server configuration (without then standard comments/whitespace). Second, have you actually reviewed the man page? The description for the --server is pretty clear about what is going on in my opinion.
    – Zoredache
    Nov 26, 2014 at 20:38

0

You must log in to answer this question.

Browse other questions tagged .