2

Question at the bottom.

I would like to use a Sun StorageTek 6100 as JBOD for ZFS, and so I have connected it to OmniOS over FC with a QLC2462 HBA. The disk array doesn't have a controller tray, just an expansion tray, so no raid controller.

Both ports on the HBA are connected to the disk array in port 1B, so I am going for multiplexing. For one of the links I get errors on all the disks, where the other link is perfect.

# fcinfo remote-port -sl -p 210000e08b89bd75
Remote Port WWN: 200100a0b84f89cf
        Active FC4 Types: 
        SCSI Target: yes
        Port Symbolic Name: 
        Node WWN: 200000a0b84f89cf
        Link Error Statistics:
                Link Failure Count: 0
                Loss of Sync Count: 5
                Loss of Signal Count: 8
                Primitive Seq Protocol Error Count: 0
                Invalid Tx Word Count: 76
                Invalid CRC Count: 0
        LUN: 0
          Vendor: ATA     
          Product: HITACHI HUA7210S
          OS Device Name: /dev/rdsk/c3t200000A0B84F89CFd0s2
 ...

I have tried to replace the fibre, but the errors persist, and don't increase.

When looking at format I see 4 of the disks as expected, and not the remaining 10.

 ...
     /scsi_vhci/disk@g5000c5006443582b
 36. c3t200000A0B84EC566d0 <ATA-HITACHIHUA7210S-0609 cyl 60798 alt 2 hd 255 sec 126>
     /scsi_vhci/disk@g200000a0b84ec566
 37. c3t200000A0B84F2D06d0 <ATA-HITACHI HUA7210S-0609-931.51GB>
     /scsi_vhci/disk@g200000a0b84f2d06
 ...

cfgadm -al shows all 14 disks for both links.

Question

When there is no controller tray in the disk array, why am I not seeing all the disks?

Can the link error have something to do with this? If, how can it be fixed or reset?

1 Answer 1

2

The Tx errors is either because of faulty fibers or HBA.

I am guessing you were using hardware raid before, right? And had 4 pools?

What you are seeing are not LUNs, but raw disks. Just use zpool create on the devices, and if the disks contain old pools, the you have to clear the beginning and end of the disk to get rid of that meta info.

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .