I installed Centos7 onto a box we have here for testing, I am using a Bootable HDD to install it on the System, I have used the same HDD to install Centos7 on a Dell Powerblade Server & a HP Z640 System but it will not install on this Tyan Box for some reason.
Box Specs
Previous Operating System Windows 10 Pro 64-bit
CPU
CPU 1 Intel Xeon E5 v3 @ 2.40GHz Haswell-E/EP 22nm Technology
CPU 2 Intel Xeon E5 v3 @ 2.40GHz Haswell-E/EP 22nm Technology
RAM
64.0GB Unknown @ 931MHz
Motherboard
TYAN FT77C-B7079 (SOCKET 0)
Graphics
Standard Monitor (1024x768@60Hz)
ASPEED Technology Microsoft Basic Display Adapter (ASPEED Technology)
8x NVIDIA GeForce GTX 980 Ti 2047MB (PNY)
ForceWare version: 361.91
SLI Disabled
Storage 238GB Samsung SSD 850 PRO 256GB (SSD) 25 °C
The install appeared fine, went through the usual steps and rebooted. after reboot it runs through POST and gives me two options
I have multiple options in the BIOS under Boot options.
I have swapped the order of each one multiple times, Booting form UEFI OS:, SATA0 PO:, and CentOS Linux (PO: SSD......
Each one has the same outcome, i get to this screen below.
Choosing EITHER of the above options results in the same outcome, a black screen and nothing comes from it, no errors, no cursor, nothing.
Edit - Picture of the exciting black screen.
I have SecureBoot Disabled already.
I cannot get a terminal, I have tried Alt+F1, Alt+f2, Ctrl-Alt+F1, Ctrl-Alt+F2, ESC etc..
I have also re-installed twice, I also tried using the "Troubleshoot" option and install with basic GUI but had the same result.
I have seen multiple questions similiar to this on here but the difference is they could all access the Terminal, I unfortunately can't, or at least if I can, I'm not sure on how.