Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

We recently had problems with our SBS 08 server, and we disabled the software raid 1 of our C:

Now that everything is back to normal, I wanted to re-enable it in the disk management, right-click on C: -> Add mirror, but it's greyed, same thing for the old other volume we used for the raid.

We broke something but i don't know what, can you help us plz.

share|improve this question

1 Answer 1

up vote 1 down vote accepted

It sounds like you broke the mirror instead of removing it (creating two volumes, one from each half of the mirror). Assuming that's the case, delete the volume that you're not using that was created during that "Break Mirror" operation to free the space. Then you'll be able to add a mirror to the "C:" volume.

share|improve this answer
    
Thx for you answer, so to be clear, I have my C: and the other volume we used for the raid (I:). So I have to delete I:, then format it and "add a mirror" on C:. It will then resync the I: with the C: ? What i'm afraid of is that it will resync the C: based on what is on the I: ! –  Bastien974 Jan 14 '10 at 20:53
    
Delete the I: volume so that the disk has free space. Do not create or format a new volume-- just right-click the C: volume and the "Add Mirror" option will be available. If you create and format a volume you will not be able to add a mirror. –  Evan Anderson Jan 14 '10 at 21:47

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.