Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I'm having the same problem with a variety of new machines that I have built.

When I RDC into the machine, the display does not update correctly. I get partial images, or refreshes only every 20-30 seconds. It is completely unusable. Eventually, it will even disconnect even though I am logged in.

From RDCing into the machine, it looks like the machine is down, but it is fine. I can connect to it with an monitor and the problem is not visible.

I think it is a problem with my network configuration.

What should I look for to resolve this?

share|improve this question
    
What kind of network connection exists between the client and the server? –  joeqwerty Jan 14 '10 at 17:26
    
Physically? The servers are in a data center. Normal internet. –  Jason Jan 14 '10 at 17:40
    
So, you're connecting across the internet from the client to the server? What kind of internet connection on each side? You can check for latency and packet loss by running pathping on the client. You'll need to be able to run it against something on the server side that allows inbound ICMP traffic. Example: C:\>pathping www.google.com or C:\>pathping 1.2.3.4 –  joeqwerty Jan 14 '10 at 18:02

1 Answer 1

There are two things I'd look at:

  • CPU/RAM use at the Server level
  • Network stability and performance

Use task manager (Resource Monitor) to monitor processes and check for CPU, RAM, Disk page use on the server. Make sure you do this while at the server though (locally connected to it). For network issues, you might want to do regular pings and see what the latency is, I usually use MTR through as it gives me more information about my connection (Ping/trace route with jitter info). If you see high latency/jitter to the server, you might want to use Wireshark to find out why and where you're seeing the issue at.

Good luck!

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.