Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

Internet <---> 320B (ADSL modem) <---> Fortigate 60 (firewall) <---> lan

The ADSL line is with static IP, with username and password and with pppoa.

The web interface of the DSL 320B allows only 3 configurations: 1. with dynamic IP, username and password 2. with static IP, without username and password 3. bridging without username and password. The Fortinet Fortigate 60 allows only connections with pppoe, so it seems that the third config couldn't work. The first also, because I have a static IP and the second doesn't work because I have to give username and password to authenticate the connection.

Maybe I could solve the problem with the cli of 320B, but it's fully undocumented and till now I couldn't find documentation.

With this ADSL line config and with this hardware is it possible to solve my problem?

share|improve this question
add comment

1 Answer 1

up vote 1 down vote accepted

From the info above, I would say 'No'.

Given the cost of the Fortigate box, and the ADSL box (pretty expensive, dirt cheap) wouldn't it make more sense to buy a new ADLS modem that suits?

The way we ran our office was with a Fortigate box. Well, multiple offices, multiple boxes, globally to build a large WAN through permanent VPNs between sites. The FortiGates worked really very well, high uptime, and good throughput. Certainly not consumer grade, which the adsl modem really is.

So, I would find a half-decent ADSL modem (NetGear etc), and configure it to connect for you and get the IP, bridging the connection to the WAN port of the Fortigate, which can then handle NAT, DHCP, etc.

share|improve this answer
    
Thx for your answer, really sensible, but it's a backup line, the Fortigate is unupdated since at least 3 years, we don't have a maintenance contract and the solution was envisaged to be very cheap because we already had the Fortigate. Such fine ADSL modem should only grant an internet connection with a static IP, giving username and password over pppoa and that shouldn't be too much also for a 40$ modem. I'll get in touch with D-LINK technical support, asking for a working config for a Linux PC connected to such modem, then it will be up to me to get it working in my scenario. –  twistedbrain Jan 17 '10 at 13:37
    
D-LINK never more. The support was fully unsupportive. It is I registered my modem on the site and asked for support describing my problem. After four days nothing happened. I decided to phone them (to a paying number). They read with me my request and then said something fully off topics (that I need a router, not a modem) and I told that I leave them the time to read and understand the problem. They told that they would call me back and nobody did that, after 4 days I had to call again to hear again that I need a router, so now I bought a NETGEAR DM111P (modem) that works and costs $40. –  twistedbrain Feb 5 '10 at 19:17
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.