Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I am trying to RDP from a Windows 7 Professional dual monitor physical machine to a Windows 7 Professional VM hosted on esxi 4.0.

I can get the spanning option to work to both monitors, but I have tried 3 different methods of connecting but have not been able to use true multiple monitors.

At different times, I tried checking the "use all monitors" option, command line mstsc /multimon and added the line use multimon:i:1 to the .rdp file. None of these worked. Any ideas? The physical machine can connect to other Windows 7 physical machines with true multi monitor access.

I also have the same issue when going from a 32bit RC1 machine to a Windows 7 Professional x64, but not when going in the reverse direction. Here's the .rdp:

screen mode id:i:2
use multimon:i:1
desktopwidth:i:1440
desktopheight:i:900
session bpp:i:16
winposstr:s:0,1,341,118,1139,568
compression:i:1
keyboardhook:i:2
audiocapturemode:i:0
videoplaybackmode:i:1
connection type:i:1
displayconnectionbar:i:1
disable wallpaper:i:1
allow font smoothing:i:0
allow desktop composition:i:0
disable full window drag:i:1
disable menu anims:i:1
disable themes:i:1
disable cursor setting:i:0
bitmapcachepersistenable:i:1
full address:s:192.168.1.5
audiomode:i:0
redirectprinters:i:1
redirectcomports:i:0
redirectsmartcards:i:1
redirectclipboard:i:1
redirectposdevices:i:0
redirectdirectx:i:1
autoreconnection enabled:i:1
authentication level:i:2
prompt for credentials:i:0
negotiate security layer:i:1
remoteapplicationmode:i:0
alternate shell:s:
shell working directory:s:
gatewayhostname:s:
gatewayusagemethod:i:4
gatewaycredentialssource:i:4
gatewayprofileusagemethod:i:0
promptcredentialonce:i:1
use redirection server name:i:0
drivestoredirect:s:

I believe Oscar Duveborn answered this question in a posting on another question: You need Windows 7 Ultimate or Enterprise at the end-point to support multiple terminal services displays (or any edition of Windows Server 2008 R2). Can anyone confirm there is no way to install/upgrade rdp7.0 on professional to get true dual screen rather than spanning?

share|improve this question
2  
I thought the correct flag was mstsc /span? Anyway you might have better luck with this over at superuser.com –  Mark Henderson Jan 25 '10 at 2:04
    
I suspect the problem may be more with the ESX virtual machine's fairly limited virtual video adapter - I believe true multi-monitor support is available with VMware View managed VM's when using PCOIP rather than RDP. Have you tried this with Workstation 7 or the new version of Player? –  Helvick Jan 25 '10 at 2:19
    
Hmm. We run our Terminal Servers on ESXi, and the console settings are always just set to 640x480 with the VMWare tools installed. When you run an mstsc session the local video driver is bypassed with the Terminal Server renderer. In fact I've had a TS that doesn't even have the local video card driver installed and it's fine with multi-desktop... –  Mark Henderson Jan 25 '10 at 5:55
    
in 15 days, your RC1 won't work anymore –  Mathieu Chateau Feb 2 '10 at 10:59
    
What do you mean by "True" multimonitor? Do you get "fake" multimonitor the rest of the time? –  Chris S Mar 19 '10 at 18:45
add comment

3 Answers

up vote 2 down vote accepted

Multi monitor support with RDP is only supported on Windows 7 Enterprise and Windows 7 Ultimate. That is for the server side of the RDP connection.

http://windows.microsoft.com/en-US/windows7/Remote-Desktop-Connection-frequently-asked-questions

share|improve this answer
add comment

Is multiple physical monitors supported by RDP? I thought this was why http://www.splitview.com/ existed?

share|improve this answer
    
Since TS 6.0 client, yes –  Mark Henderson Jan 25 '10 at 2:03
    
Yes, Win7 / server 2008 R2 introduced it finally ;) –  TomTom Mar 20 '10 at 9:08
    
I stand corrected, as per my own post at serverfault.com/questions/124675/windows-7-multi-monitor-rdc/… there is a group policy setting that should enable it for the Windows 7 machine. –  ta.speot.is Mar 21 '10 at 8:55
    
multimonitors will work with a WindowsXP client connecting to windows server 2008 machines. it may also work with server 2003 but i havent tried it yet. –  djangofan Jun 15 '10 at 15:50
add comment

Isn't it:

mstsc /span /v:SERVER
share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.