Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I have a Dell R710 2U server. It's pretty heavy, so it seems to me like it needs support in the front and the back, but we only have a 2-post rack. The rack is bolted to the floor, so it's pretty sturdy.

In general, is it okay to flush-mount a 2U server in a 2-post rack?

I have a much lighter 1U server mounted there, and it seems okay. Also, the tech guide for the R710 says:

Support for flush and center mount installation in CEA-310-E compliant 2-post racks (1U & 2U only)

But it just doesn't seem right to me.

Thanks!

Update: I contacted Dell tech support, and they pointed me to a 3rd party solution from racksolutions.com for center-mounting the R170 in a relay rack. So I'll try that + one of the shelves suggested by Zypher.

share|improve this question
    
+1 Would be interested in this answer. Seems like a great deal of weight on the front. What hardware came with the R710? Any I have seen is for 4 post –  Dave M Jan 19 '10 at 18:46
    
I hear the guy who invented the two post rack is brothers with the guy who invented the short handled shovel. –  Joseph Kern Jan 20 '10 at 3:37
    
Dave: Yep, the hardware is for a 4-post rack. –  Derek Kurth Jan 20 '10 at 15:15
    
I've used the racksolutions.com rails to mount servers as big as 5U (PowerEdge 2600) in two-post racks with no problems. –  Evan Anderson Jan 20 '10 at 15:49

4 Answers 4

up vote 5 down vote accepted

I don't think I'd be comfortable doing that either. We use Two post Rack Shelves to help support 2-4U server in 2 post racks.

share|improve this answer

If it was me I would not flush mount a server in a 2 post rack I would center mount all my servers. I don't like to put servers in a Relay rack as they are built more for telco and network equipment. They will work for servers as the mounding brackets have been manufactured to work with the Relay racks. But in general I don't like to use relay racks to mount servers.

share|improve this answer

If it were me, and the manual said that it is supported in a CEA-310-E compliant 2-post rack, then I would verify that my rack meets the compliance and call Dell to find out what mounting hardware to use.

share|improve this answer
    
I tried to look up the standard, but it costs $52! Sheesh. ce.org/Standards/… –  Derek Kurth Jan 19 '10 at 19:24
    
Why not contact the vendor of the rack and ask them if it meets the compliance. Also, are there any compliance stickers anywhere on the rack or any identifying labels, etc.? –  joeqwerty Jan 19 '10 at 20:06
    
Those are good suggestions! We got the rack free (second hand), and it doesn't appear to be branded, but I'll look more closely. –  Derek Kurth Jan 19 '10 at 20:58

If you can center mount it, it should be fine. I wouldn't flush mount it due to the amount of torque that will be put on the mounting hardware from the rear end of the server just dangling in space.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.