Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I have installed squid on a mac mini and would like to configure it to be used as a proxy

Any ideas where i would start, especially setting up the ACLs, am using webmin as the GUI tool for configuring squid

share|improve this question
add comment

3 Answers 3

http://gadmintools.flippedweb.com/index.php?option=com_content&task=view&id=47&Itemid=37

nothing better and this !!!for squid GUI

share|improve this answer
    
up-point for pointing out that Redhat has a GUI admin for Squid. will Redhat work "out of the box" with this admin tool or is it tough to get the admin tool configured? –  djangofan Apr 6 '10 at 15:28
    
Hi I didnt got you are asking. This tool work on the same server where you install squid not remote setup is it what your looking –  Rajat Apr 6 '10 at 17:31
add comment

Alright - if you are not using your mac mini as your gateway for all internet traffic, and if you don't have a really good reason to cache/log traffic, uninstall Squid, stop reading now.

Configuring Squid is not trivial - in fact, there is a book that was written about configuring it. That's how much goes into it. But, by all means, read this:
http://www.linuxjunkies.org/adminstration%20Howto/webminguide/c4380.htm

.. And good luck.

share|improve this answer
add comment

I found the webmin docs to be very helpful.

http://doxfer.webmin.com/Webmin/SquidProxyServer

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.