Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

this will be maybe dumb question, but I want to be sure before starting doing anything. I have here Dell PowerEdge 2800 and needs to put into it another disk. The problem is that I took this drive from another server and now needs to do a image of it. Problem is that I wasn't able to unscrew it from the tray and it doesn't fit to the Dell's one. Can I take the SCSI cable which is going from motherboard to the back of the trays and put it directly to the one disk drive?

share|improve this question
add comment

1 Answer

up vote 2 down vote accepted

Without a lot more information I'd have to say that you almost certainly can't do what you're trying without a lot more knowledge of the disk and the system board. The reason is that most if not all SAS/SCSI backplanes have auto-termination and ID hardware built into the backplane/disk-ports that won't be replicated by simply 'shunting' the cable. If this was SATA it would be a different matter and much easier, are you sure it's a SCSI disk?

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.