Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

At times I have to connect to work through a VPN, and sometimes the connection is slow. However, I've noticed that when the network is slow, EVERYTHING on the computer is slow. For example, navigating around my local C: drive is slow, even though nothing should be going across the network. It can take up to 10 seconds for the context menu to come up if I right-click on a folder. It takes another 5 seconds to navigate to a subfolder. When I disconnect from the network, I can still access everything on my local machine, and everything is MUCH faster.

Does anybody know why this happens, and is there a way to fix it?

share|improve this question
3  
What OS are you runing? What Shell extentions are there in your system? If you boot up in safe mode with Network support, does it behave the same? –  Alexander Taran May 21 '09 at 19:15
    
He's referencing C:\ so = windows of some kind. –  l0c0b0x May 21 '09 at 23:53
add comment

4 Answers 4

Something to try: Go to Folder Options, the View tab and uncheck "Automatically search for network folders and printers" and see if that helps?

share|improve this answer
add comment

Don't use mapped folders. Portions of the OS treat them as if they were local. If you need to access network folders you can use "My Network Places" on XP or similar on Vista. Using the full UNC (\machine\share...) instead of mapping a drive letter can really help.

I've been doing this for years and get much better performance. It also helps me to remember where the files really are. This is useful when I go to another machine that does not have the same drive mappings.

share|improve this answer
    
Thanks! It's amazing what a difference using UNCs makes. Windows file sharing is such a sad technology. –  BHS Aug 20 '12 at 18:35
add comment

As Alexander Taran points out in his comment, this is often due to shell extensions that try and do something on the network.

If you have drive connections to dead network shares then that could contribute to your problem also. You'll notice this slowness a lot when clicking on the Address drop-down in Explorer to change drives or the Open In / Save In dialog when opening and saving files.

share|improve this answer
    
Good point, I've seen Explorer refresh large directories very slowly when using the shell extension that comes with the Perforce revision control system. –  bk1e May 22 '09 at 6:22
    
TreeSize is also one of the leading culprits at my place. The shell extension for TreeSize is selected by default during install, but you can unselect it. –  squillman May 22 '09 at 14:08
add comment

FWIW, I've found my computer having lots of issues if I don't set the VPN connection to not use the VPN as the gateway when I'm connected. It's set by default and directs all network traffic over the VPN, not just traffic destined for that subnet. It prevents one from browsing the web while connected to the VPN, as one side effect, and I've noticed it causing my computer to crawl in explorer as well.

If you're using windows, you can change this easily go to the TCP/IP settings on the VPN connection's network tab, open the proerties, and hit the advanced button. Un-check the use default gateway button.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.