up vote 2 down vote favorite
share [g+] share [fb]

Anyone got any idea what the aprox weight of a half size server rack (with stuff in it) would be?

Assume a 24U dell rack with 4x1Us and 4x2Us, switch, kvm unit, cables and a couple of low end UPS devices inside.

link|improve this question
It sounds like you are trying to move a rack between two locations. This question may help: serverfault.com/questions/49998/… – David Mackintosh Feb 8 '10 at 17:23
intersting link thanks. Actually it was to see if the lift in our building can handle the whole rack in one go. – dansquid Feb 9 '10 at 9:55
feedback

1 Answer

up vote 6 down vote accepted

http://www.dell.com/content/topics/topic.aspx/global/products/pedge/topics/en/config_calculator?c=us&l=en&cs=555

Have a look at the capacity planner - it should show you a weight calculation by model, as well as quite a few other things

link|improve this answer
feedback

Your Answer

 
or
required, but never shown
discard

Not the answer you're looking for? Browse other questions tagged or ask your own question.