Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

i have setup squid which is running as a transparent proxy where http requests are sent through 176.16.1.197:8000

i would like to setup dansguardian with the above configuration of squid but i just cant seem to get it right. How can i go replacing the information above into the configuration of dansguardian?

# the port that DansGuardian listens to.
filterport = 8080

# the ip of the proxy (default is the loopback - i.e. this server)
proxyip = 127.0.0.1

# the port DansGuardian connects to proxy on
proxyport = 3128
share|improve this question
add comment

2 Answers

You need to set it up as a parent cache. Adapt the instructions here for your use. It is for squid transparent proxy with a Privoxy parent but your setup is similar.

share|improve this answer
add comment

filterip = XX.XX.XX.XX (IP of Dansguardian) if you are using a single server loopback is fine. filterport = 8080 - port of dansguardian proxyip = XX.XX.XX.XX (IP of the squid proxy server), if you are using a single server loopback is fine. proxyport = 3128 - port of squid proxy server

try configuring your internet option on lan settings, and

proxy: XX.XX.XX.XX port 8080

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.