Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

By default, Windows services start in the sytem32 directory (usually C:\WINDOWS\system32).

Is there a way to set up a different working directory? I am thinking of some registry parameter beneath HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SomeService.

So - can this be done?

share|improve this question
2  
@Tomalak: Is it a service you wrote? You can do it through code, but I don't think there is a way through the service settings. –  MattB Feb 18 '10 at 14:49
    
No, it isn't a service I wrote. I was hoping some little-known registry setting here. –  Tomalak Feb 18 '10 at 15:39
    
What is the purpose of doing it? –  user35115 Feb 18 '10 at 18:48
    
@user35115: Well, to be honest… While tracking down an unrelated problem with procmon, I noticed that a certain I/O-heavy service (a full text indexer) consistently checks for its own files in the wrong locations (pretty dumb). It starts at system32, tries a few more locations, and eventually its own directory. I figured when it would run in its own directory right away, it would do less unnecessary file checks. Not that it would not work currently, yet it made me wonder if there was room for improvement. –  Tomalak Feb 18 '10 at 19:53

4 Answers 4

up vote 4 down vote accepted
+100

You could use DLL injection to call SetCurrentDirectory after the process has already launched. This would require you to build an injector application, plus the DLL to inject. Some tutorials exist; probably the two best ones I've found are:

You'll need a decent amount of C++ programming background (and a working build environment) to get through that.

However, this assumes that the service is looking at the current directory. Another possibility is that it's using %path%. You say that it "starts at system32, tries a few more locations, and eventually its own directory", so this seems more likely to me.

Compare the directories you see in procmon with your %path%. If they're the same, consider modifying either the SYSTEM %path% or the %path% of the user running the service, so that the directory you want it to search is first.

I believe Fred is right, though -- you're unlikely to see any significant performance benefit by doing any of this, unless it's happening very frequently. Simple file open operations are not particularly expensive, especially if it's a local path and the file doesn't actually exist.

share|improve this answer
    
The system PATH environment variable was the first thing that came to mind for me. Inserting the service's path at the start of the PATH variable will however have a negative effect on the performance of just about every other application so I wouldn't advise that. –  Marnix van Valen Feb 25 '10 at 21:21
    
I don't have hard numbers to back this up either way, but my intuition tells me that no practical performance gain or loss would occur from modifying the path. This is a fairly common scenario; nobody blames, say, the Windows Support Tools, or SQL Server, for negatively impacting system performance when it modifies the path during installation. This isn't the first time I've seen someone look at procmon and go "omg, look at all those file accesses!", not realizing that it's typical for most applications. –  fission Feb 25 '10 at 23:15
    
+1 for creativity. :-) I fully understand that these file operations do not impact performance measurably, so I'm not going to actually bother writing a DLL injection solution. Modifying %PATH% for the user account the service runs under is a decent idea, though. –  Tomalak Feb 26 '10 at 9:56
    
Thanks! Does this mean you're accepting my answer? :D –  fission Feb 26 '10 at 18:27
1  
Creating a special user to run this service only and modifying the %PATH% for this user sounds as a very good way to go. +1 –  Sunny Feb 26 '10 at 21:37

Like MattB, I don't know of any way to change the service's working directory w/o access to the source code. For this specific scenario, it's likely that the extra directory checks don't impose that much unnecessary disk activity relative to the amount of i/o required for the full text indexing operation. Even if you could optimize them away, the full text index will be disk intensive by the nature of the beast.

share|improve this answer

Add an "AppDirectory" string value to the Parameters Key and set the value to your desired working directory.

share|improve this answer
    
Hm. Just tested, does not seem to work (On Windows 7, used REG_EXPAND_SZ data type). Can you re-confirm this actually works for you, please? –  Tomalak Nov 22 '10 at 18:06
    
This works when using srvany. Not sure about normal services. –  Konstantin Spirin Mar 2 '11 at 2:51

Do this within the Service main function:

  • Make a call to GetModuleFilename. It will retrieve the module (the exe) filename including path, in the form C:\path\to\exe\your_service.exe.
  • Use string manipulations (maybe using std::string function find_last_of()), to find the last backslash. Strip/trim the string from there on to obtain the path to your module and therefore the directory of your exe.
  • Make a call to the function SetCurrentDirectory and voila!
share|improve this answer
1  
do not forget to pass null to the HMODULE parameter in the GetModuleFilename function call :) –  uprightech Feb 8 '11 at 8:54

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.