Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

We have a number of wireless clients using ubiquity radios that support PPPoE. The number of connected clients is currently sitting around 20. But this is increasing rapidly and we want better control so we plan to authenticate users against a freeradius server using PPPoE.

Things we want to control are authentication, bandwidth management and accounting.

I was wondering if someone could recommend an appropriate howto on the subject.

Is there a web interface available that allows all this functionality to be controlled from the one place? set up the firewall rules etc.

My preference is FreeBSD but might consider a linux solution too.

share|improve this question

2 Answers 2

up vote 2 down vote accepted

The following is a pretty good tutorial : http://www.freeantennas.com/PPPoE-Server-HOWTO.html

DialupAdmin ( http://freeradius.org/dialupadmin.html) is a freeradius web interface

share|improve this answer

You might also want to delve into this HOWTO for Mikrotik, although it's a competing product the FreeRadius notes are pretty extensive:

http://wiki.mikrotik.com/wiki/RouterOs_MySql_Freeradius

I would highly also recommend DailupAdmin as mentioned by @Dominik and then there is the book Radius that could help you a lot.

Good luck with your journey!

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.