Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I'm ordering an Enhance Tec E8 external harddrive enclosure with with a Mini SAS 8088 connector. I plan to use 8 drives in a RAID 5. The RAID Controller I'm looking at says it has 2 x4/x8 hybrid ports, however all the ext mini SAS to mini SAS cables I can find say x4. Does that mean the x4 can only address 4 harddrives and I'd need to get two x4 cables to take use of all 8 harddrives or am I misunderstanding something here?

Thanks!

Tom

share|improve this question
add comment

1 Answer

up vote 2 down vote accepted

I looked up that unit, and I suspect you are talking about the E8-MS unit. That unit has two Mini-SAS ports on it, which you would use SFF-8088 cables to connect from the controller to the box. Those cables are designed to support 4 drives each, not by arbitrary decision, but by the physical wiring of the cables. If the controller says it supports x8 ports, then it must be referring to a special cable they make/sell to connect to 8 drives. However, you will still need 2 SFF-8088 cables to connect to the E8-MS unit.

share|improve this answer
    
Just to illustrate this a bit, there's a few good diagrams here: enhance-tech.com/products/desktop/E8_MS.html –  Chris Thorpe Jul 2 '10 at 14:36
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.