Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I have Cisco Catalyst 65XX, many VLANs and about ~1300 users. Users connected to some D-Link switches with second-level management. D-Link switches come to my Cisco Catalyst 65XX by VLANs.

So, how I can shape traffic per user?

If I use something like this:

access-list 145 permit ip any host 192.168.0.1
access-list 145 permit ip any host 192.168.0.2
access-list 145 permit ip any host 192.168.0.3
...
int Gi0/1
 traffic-shape group 145 128000 7936 7936 1000

will I have shape traffic per user or it will shape traffic only on interface? I mean - every user will have 128kb/s (per user) or everybody will have 128kb/s ?

If it will be for everybody, then what is the solution of my question: how every user can have 128kb/s ?

share|improve this question

2 Answers 2

Should shape everything that matches access-list 145 ... so everyone is shaped into 128kbps (not per user!). You should probably go with a class-based QoS ... take a look here

share|improve this answer
    
Thank you, already read this. But... Is there no one chance to shape it easy? May be other model of router/catalyst I need to use? –  Nadz Goldman Feb 28 '10 at 12:02
    
well, do the dlinks have a per-port policy? maybe you can shape/limit directly on those ... –  Mr Shunz Mar 1 '10 at 10:07

Look into microflow policing - allows for limitation of bandwidth on a per-flow basis. You can define what makes up a flow (i.e src or dst IP, port, etc) and how much bandwidth each is limited to. This is a decent overview of some of your general options on a 6K:

http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a00801c8c4b.shtml

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.