I am trying to figure out how to setup routing on OpenVPN.
I have successful connection between client (OS X Snow Leopard) and server (OS X Leopard Server), and each can ping the other. However, I am wanting the connecting client to be able to access other machines on the network.
Here is how my network is laid out. On the server side there is a Verizon Fios router that has a public dynamic IP address (which I know through DynDNS.org), and an internal address of 10.50.60.1. The router is configured with a machine in the DMZ of 10.50.60.160.
This machine (10.50.60.160) is hosting OpenVPN and all other machines I want to connect to are on the 10.50.60.x network.
The client is connecting in from different locations (although the one I am testing from right now has assigned me the address of 10.1.5.11.
OpenVPN is configured to work on the 10.8.0.0 network and assigns IP addresses successfully to the client machine. I have done it this way because of what I have read. I am fine changing this anyway that is needed to work. I have attached the server config file below, as you can probably see from the ‘push’ and ifconfig entries I am not quite sure what I am doing. Can you let me know how I would configure this so that once the VPN is connected I can ping and access 10.50.60.160 and my other machines on the 10.50.60.x network?
My server config file is as follows:
dev tun tls-server ca /etc/openvpn/openvpn2/easy-rsa/2.0/keys/ca.crt cert /etc/openvpn/openvpn2/easy-rsa/2.0/keys/server.crt key /etc/openvpn/openvpn2/easy-rsa/2.0/keys/server.key # This file should be kept secret dh /etc/openvpn/openvpn2/easy-rsa/2.0/keys/dh1024.pem verb 3 comp-lzo keepalive 10 60 ping-timer-rem persist-tun persist-key server 10.8.0.0 255.255.255.0 push "route 10.50.60.0 255.255.255.0" push "ifconfig 10.50.60.0 10.8.0.1" ifconfig 10.8.0.1 10.50.60.0 duplicate-cn max-clients 5 ifconfig-pool-persist /etc/openvpn/ipp.txt
Any help would be really appreciated.