Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I'm currently using HP Proliant DL120 G5 servers running VMWare ESXi 4 to run server VM's. They are connecting to an iSCSI SAN for the shared storage. I'd like to implement a delayed boot of these hosts servers so that they don't boot up and try to connect to the SAN before the SAN is ready for connections after a power failure. Does anyone know of a good way to do this?

share|improve this question

3 Answers 3

HP Blades let you do this but the DL100 series don't - what I'd do is delay the startup of Guests, this will allow time for your ESXi host to connect to your storage.

If you really want to delay the OS booting then HERE is a guide of how to do this with ESXi 3-3.5 - not tried it with 4 yet however.

share|improve this answer
    
SYSLINUX. Good to know. –  Ignacio Vazquez-Abrams Apr 12 '10 at 16:53

Many bootloaders have some sort of configuration option that gives a timeout before running the default selection. For lilo this is the delay= setting, and for grub this is the timeout setting. All you need to do is add it if not present, and give it an appropriately high value. ESXi's bootloader should have a similar option, if it's not one of those two.

share|improve this answer

This should help: http://www.vm-help.com/esx/esx3i/boot_delay.php

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.