0

is there a way or command if im login to SuSe Linux shell which can show me the ILOM IP address. Machine type SUN Netra X4250.

Improve this question
1
  • I miss ALOM :( ""
    – Syed
    May 28, 2010 at 20:15

2 Answers 2

Reset to default
1

If you have the serial port connected up on the server you can run the following command which will tell you what the IP is

cd /SP/network    
cat pendingipaddress

by default this is setup to use DHCP If you need to use a static IP try following these instructions.

Improve this answer
1

You can't find it out, but I think it defaults to coming up via DHCP, so your DHCP server might be able to tell you. Alternately, you can go into the BIOS and set it there.

Update: It looks like ipmitool might also be able to interface with ILOM.

Improve this answer
1
  • Sun doesn't have Linux ILOM interfaces? (I don't know, I'm familiar with HP equipment where there are tools).
    – Chris S
    May 28, 2010 at 14:56

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .