I do not have much skills in linux and installed a system two years ago that I now had to reboot, but it seems I did not automate everything with start-scripts...
My Problem: I miss some mountpoints. I have a list of my raids (excerpt:)
md3 : active (auto-read-only) raid1 sda6 sdb6 97659008 blocks [2/2] [UU] md4 : active (auto-read-only) raid1 sda7 sdb7 250099776 blocks [2/2] [UU]
and it seems md3 and md4 are NOT mounted. However i do NOT have any entries for them fstab file.
What should I do next. I do NOT know which filesystem they have (most likely ext3).
=>Can I savely try to mount them with (
mount -t ext3 /dev/md3 /mnt/mymntpoint) or will the lead to corrupted data, in case they are not ext3?
What should I do next (based on the information given above). The goal is to remount these Devices again, but I do not know anything about them anymore...
Thank you very much Jens