Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I am having an issue with VMWare Server 2 running on a Windows SBS 2008 host.

I can browse to https://server:8333/ and if I view source I can see that the page has loaded, but the redirection and browsing directly to https://server:8333/ui/ never finishes loading - just continually tries to load the page.

I'm not sure what logs to check or where I should go from here, but I need to get more VMs running on this server - any ideas?

Cheers,

Sam

share|improve this question
    
Looks like we're just gonna roll a ESXi server, thanks for your help guys. –  user36665 Jul 15 '10 at 22:53

3 Answers 3

I was suffering the same problem for a long time and most of these hints (CTRL-R or vmware restart) worked for me for long. But some time ago i found a thread on the official vmware forum there people tracked down the problem to some SSL-protocol-wiredness between vmware-webui and current webbrowsers.

To cut things short, you must activate SSLv2 Mode on your webbrowser and maybe reload the webui via CTRL-R. You can get detailed instructions about this workaround on my Blog.

http://www.rootz.de/2010/05/vmware-2-x-kein-zugriff-auf-die-weboberflache-moglich-loading/

(its written in german but maybe the screenshots are helpful)

share|improve this answer
    
Thanks for your response, however we ditched the VMware server and are now running an ESXi server. –  user36665 Jul 22 '10 at 20:00

Have seen similar behaviour on Centos 5 as well. What we do is to restart the service that listens on port 8333. This takes care of the problem.

There is also command line API for VMWare server - try command 'vmrun'

share|improve this answer
    
Thanks - I had a look at vmrun and could see functions for stopping and starting VMs etc, but no sort of service that could give me access back into the Web UI. –  user36665 Jul 12 '10 at 22:03

Annoyingly the command line API doesn't work when the webservice is not running correctly.

The logs are usually in C:\Documents and Settings\All Users\Application Data\VMware\VMware Server and in the individual virtual machine folders. These are usually quite helpful.

I have found that a problem with vmware server or with an individual machine can stop the interface from working.

Another thing that you might want to check is that I had an SSL handshake error under firefox after installing the console plugin, it seems far happier when you use IE.

share|improve this answer
    
I had a look at this but wasn't able to find anything obvious, unfortunately. –  user36665 Jul 15 '10 at 22:53

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.