Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

CentOS 5.x | VPS | OpenVZ

I'm trying out a vps that uses OpenVZ and am not sure what command to type to measure disk read performance. I thought hdparm would work but I get the following:

[root@echo dev]# hdparm -t /dev/simfs
/dev/simfs: Permission denied

Yet I don't see any other file systems to check...

[root@echo dev]# mount
/dev/simfs on / type reiserfs (rw,usrquota,grpquota)
/proc on /proc type proc (rw)
/sys on /sys type sysfs (rw)
none on /dev type tmpfs (rw)
none on /dev/pts type devpts (rw)
none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)

Anything else I can try?

-M

share|improve this question

2 Answers 2

up vote 3 down vote accepted

good old bonnie++; not most flashy benchmarking tool but one that gives useful results [ random and sequential reads/writes, i/o per sec ].

share|improve this answer

You could try to work around directly calling on /dev/simfs with a timed dd command:

time (dd if=/dev/zero of=/tmp/test bs=64k count=16k > /dev/null; sync)

Probably not as accurate as a true benchmark, though. Just a workaround. Example output:

16384+0 records in
16384+0 records out
1073741824 bytes (1.1 GB) copied, 6.13276 seconds, 175 MB/s

real    0m6.786s
user    0m0.010s
sys     0m1.680s

Make sure to delete /tmp/test afterwards.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.