Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

is there a way to restart the config wizard which goes through the few first steps after you install snow leopard server. is there a way to get that wizard to force run it again at a later date rather than wiping and loading again? thanks.

share|improve this question
    
Why do you want the wizard to run again? Is there something in the configuration that you'd like changed? –  GregD Aug 8 '10 at 14:07
add comment

3 Answers

up vote 1 down vote accepted

The changeip command will let you configure the new IP address.

Usage: changeip -checkhostname
Usage: changeip <dir node path> <oldIP> <newIP> [<oldHost> <newHost>]
        eg: changeip /LDAPv3/127.0.0.1 11.0.1.10 11.0.1.12 server10.example.com server12.example.com


Use - for node path to update the local node only, 
        eg. changeip - 11.0.1.10 11.0.1.12


/usr/sbin/changeip must be run as root
share|improve this answer
    
FYI - As of Mac OS X 10.5 Leopard Server, System Preferences' Network pane runs changeip automatically, but it's always good to at least run sudo changeip -checkhostname to verify. –  morgant Aug 23 '10 at 21:07
add comment

The only thing this wizard does which can't be changed by System Preferences and Server Admin later is importing the OD configuration from an old server, and this can only be run during initial setup. So, if your problem is about this, you are out of luck, I fear. If your problem is something else, could you please elaborate? There should be a way to do what you want without a reinstall.

share|improve this answer
    
i don't want to run OD again, all i want to do is take it somewhere else and put it in another subnet and re-configure it. i thought that chaging the dhcp scope of the network would just make some of the internal service lookups not work? am i right on assuming that? thanks –  user8256 Aug 8 '10 at 22:11
add comment

Delete /var/db/.AppleSetupDone and restart.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.