Take the 2-minute tour ×
Server Fault is a question and answer site for system and network administrators. It's 100% free, no registration required.

Is there a way (when logged in as an administrator, or as a member of the administrators group) to masquerade as a non-privileged user? Especially in an AD environment.

e.g., in the Unix world I could do the following (as root):

# whoami
root
# su johnsmith
johnsmith> whoami
johnsmith
johnsmith> exit
# exit

I need to test/configure something on a user's account, and I don't want to have to know their password or have to reset it.

Edit:
runas won't cut it. Ideally, my whole desktop would become the user's, etc. and not just in a cmd window.

share|improve this question
    
Just curious, but why do you need to login as the user? I would usually only need to do this to configure email. However, I've found that most of the time I can configure everything via Group Policy/Scripts/etc. –  Dayton Brown Jun 1 '09 at 15:46

7 Answers 7

up vote 18 down vote accepted

I'm pretty certain there is no supported way to run as a different user without having that user's credentials. It's a non-repudiation measure. Someone can't say: "I didn't do it", because either they did it, or someone with their credentials did it. And for the second they'd have to give the other person the credentials.

Normally how I do what I need to do while logged in as another user is to use remote assistance to essentially RDP into the session, and have them grant me control. Then I do whatever while they're watching (presumably, anyway).

Anything else can usually be done with GPO/scripts.

share|improve this answer
7  
I believe this is correct. And, IMHO this is a security improvement over the UNIX world. I like the idea that not even an admin can be me without my password. –  tomjedrz Jun 1 '09 at 16:30
3  
An admin can take over another user, by resetting their password. Then they can login as you. However, there is an evidence trail if you do this. First, the users password was changed so they'll know. Second, there will be audit logs (assuming auditing is enabled). –  Erik Funkenbusch Jun 1 '09 at 16:53
1  
This is typically how I operate as well. However, there's points that I say "It would be so much easier to do this for Bob if I was Bob", but Bob went home an hour ago. –  BIBD Jun 1 '09 at 16:55
2  
I understand what they are trying to do. I just think it's more security-theater than actual security. –  BIBD Jun 1 '09 at 19:36
1  
The non-repudiation strategy is designed with the assumption that you do not have physical access to the server, because the #1 tenant of security is that if you have physical access, all bets are off. The idea is that you create a situation where the admin cannot obtain private physical access. And, because all log files are "locked" while the OS is running, you cannot modify them outside of their normal means. –  Erik Funkenbusch Jun 1 '09 at 20:04

I've noticed a lot of other people mentioning variations on the runas command and how you need to know the users password, which is true, but I don't think that anyone has quiet answered the question. of "wanting the whole desktop would become the user's, etc. and not just in a cmd window". Here's the way I go about it:

Note: I'm going to refer to this first Command Prompt as CP1 to eliminate confussion later.

Under your admin account, open Command Prompt

For local account

runas /profile /user:computernamehere\username cmd

For domain account

runas /profile /user:domainname\username cmd

OR the way that I prefer it

runas /profile /user:username@domainname cmd

Note: A new command prompt will open (CP2), this is the user who are you trying to login as.

Open CP1 and type:

taskkill /f /IM explorer.exe

Open CP2 and type:

explorer.exe

Depending on the computer, it may create a profile for the user if they have never logged onto there before. You can save yourself the hassel later by keeping the command prompt windows open for later use.

When you're done with your work, just do the same thing in reverse.

In CP2 type:

taskkill /f /IM explorer.exe

Open CP1 and type:

explorer.exe

You should now be back into the orginal administrator account. You can do a quick check by tapping the Windows key and looking for the current user panel.

Hope this helped.

share|improve this answer
    
That is some deep magic. –  mskfisher Apr 17 at 13:02
    
@mskfisher Haha, if you think that one's crazy, you should see what I had to do to figure out how to kill a psexec session that had locked up after running a bad wmic command. ...Pskill from a second command prompt, pointed at the remote machine, after using psservices to track down the process id for psexec on the first command prompt! –  Michael H Apr 17 at 16:59

Process Explorer procexp.exe on http://live.sysinternals.com has a run as limited user (on the file menu) which will let you run a program using your current credentials, but with your ACL stripped down to that of a normal user (non-admin) user. Not what you wanted exactly, but good for testing.

share|improve this answer

There's no built-in mechanism in Windows to do this. It can be done, but you're going to have to have something written to do what you want, and you're probably going to have to muck around with undocumented APIs.

One of the posters here, grawity, has it right w/ calling CreateProcessAsUser(), but you'll need to create a token with the undocumented native API zwCreateToken first. If you killed off Explorer and fired up a new Explorer instance w/ CreateProcessAsUser() I'm fairly certain you'd get want you want.

Microsoft doesn't make what you want to do easy because it's not the way they want you using NT. If you need to be logged-on as a user to troubleshoot their issues, in most cases you're going about it in a sub-optimal way.

You can make changes to the user's registry w/o logging-on as them (by attaching their registry hive and manipulating it that way). You can make changes to files in their user profile w/o being logged-on as the user. If you need to "setup email" or other such activities "as the user", you should be writing scripts or taking advantage of built-in functionality (Group Policy Administrative Templates, preferences, etc) to do your dirty work for you.

If you have to do this, have a look at RunAsEx on Code Project. That code should give you a fairly good idea of what you'll need to do. I haven't tried the program, but it looks like it's going about everything in the right way.

share|improve this answer

Although I do not have personal experience with some of the sudo solutions mentioned on this site, I highly recommend nonadmin started by the excellent Aaron Margosis. It is a huge help as you roll out limited users. I mainly jumped with something since everyone else is saying use Runas. However, I think most or all of these so called sudo for windows deal more with elevation rather than acting as another user without their password.

share|improve this answer

(Just a guess.) If your account has SeCreateTokenPrivilege, you could write a small program to create a process using CreateProcessAsUser() or a similar function... (But not even administrators have the privilege by default.)

share|improve this answer

You can use the following command on Windows XP and later:

RunAs.exe

The command line options are available here.

This will not work without knowing the users password. I do not believe there is a way in Windows to operate under a users account without the password due to how the Security Identifiers are loaded.

share|improve this answer
3  
I believe the RunAs program still requires you to know the users' password which I believe the original question states is not known –  Kevin Kuphal Jun 1 '09 at 15:12
    
You are correct...I had forgot about that. –  Doug Luxem Jun 1 '09 at 15:14

protected by HopelessN00b Mar 12 at 7:51

Thank you for your interest in this question. Because it has attracted low-quality answers, posting an answer now requires 10 reputation on this site.

Would you like to answer one of these unanswered questions instead?

Not the answer you're looking for? Browse other questions tagged or ask your own question.