Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

Using pipes | feature in linux I can forward chain the standard input to one or several output streams.

I can use tee to split the output to seperate sub processes.

Is there a command to join two input streams?

How would I go about this? How does diff work?

Regards, Brad

share|improve this question
add comment

6 Answers

up vote 35 down vote accepted

Personally, my favorite (requires bash and other things that are standard on most Linux distributions)

The details can depend a lot on what the two things output and how you want to merge them ...

Contents of command1 and command2 after each other in the output:

cat <(command1) <(command2) > outputfile

Or if both commands output alternate versions of the same data that you want to see side-by side (I've used this with snmpwalk; numbers on one side and MIB names on the other):

paste <(command1) <(command2) > outputfile

Or if you want to compare the output of two similar commands (say a find on two different directories)

diff <(command1) <(command2) > outputfile

Or if they're ordered outputs of some sort, merge them:

sort -m <(command1) <(command2) > outputfile

Or run both commands at once (could scramble things a bit, though):

cat <(command1 & command2) > outputfile

The <() operator sets up a named pipe (or /dev/fd) for each command, piping the output of that command into the named pipe (or /dev/fd filehandle reference) and passes the name on the commandline. There's an equivalent with >(). You could do: command0 | tee >(command1) >(command2) >(command3) | command4 to simultaneously send the output of one command to 4 other commands, for instance.

share|improve this answer
    
awesome! i've read bash's manpage lots of time but hadn't pick that one –  Javier Aug 16 '10 at 21:12
2  
You can find the reference in the [advanced bash scripting guide] (tldp.org/LDP/abs/html/process-sub.html) at the linux documentation project –  brice Jul 8 '11 at 15:50
    
You rock. Thanks. –  Steve Kehlet Dec 19 '12 at 1:30
1  
i was able to prevent interleaved lines by piping through grep --line-buffered - handy for concurrently grep'ing the tail of multiple log files. see stackoverflow.com/questions/10443704/line-buffered-cat –  RubyTuesdayDONO Apr 8 '13 at 20:47
add comment

I have created special program for this: fdlinecombine

It reads multiple pipes (usually program outputs) and writes them to stdout linewise (you can also override the separator)

share|improve this answer
add comment

A really cool command I have used for this is tpipe, you might need to compile because it not that common. Its really great for doing exactly what your talking about, and it's so clean I usually install it. The man page is located here http://linux.die.net/man/1/tpipe . The currently listed download is at this archive http://www.eurogaran.com/downloads/tpipe/ .

It's used like this,

## Reinject sub-pipeline stdout into standard output:
$ pipeline1 | tpipe "pipeline2" | pipeline3
share|improve this answer
add comment

Be careful here; just catting them will end up mixing the results in ways you may not want: for instance, if they're log files you probably don't really want a line from one inserted halfway through a line from the other. If that's okay, then

tail -f /tmp/p1 /tmp/p2 > /tmp/output

will work. If that's not okay, then you're going to have to do find something that will do line buffering and only output complete lines. Syslog does this, but I'm not sure what else might.

share|improve this answer
add comment

You can append two steams to another with cat, as gorilla shows.

You can also create a FIFO, direct the output of the commands to that, then read from the FIFO with whatever other program:

mkfifo ~/my_fifo
command1 > ~/my_fifo &
command2 > ~/my_fifo &
command3 < ~/my_fifo

Particularly useful for programs that will only write or read a file, or mixing programs that only output stdout/file with one that supports only the other.

share|improve this answer
add comment

(tail -f /tmp/p1 & tail -f /tmp/p2 ) | cat > /tmp/output

/tmp/p1 and /tmp/p2 are your input pipes, while /tmp/output is the output.

share|improve this answer
3  
Note: Unless both commands in side the () flush their output on every line (and some other obscure POSIX rules for atomicity), you could end up with some weird scrambling on the input to cat ... –  freiheit Aug 16 '10 at 18:41
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.