Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

We have a Dell poweredge 2970 with 4 drives. Someone claimed to have shutdown the server and no one mention of any hardware changes. But when we tried to start we have a Memory error saying is not optimal and also 2 logical drives failed and the server is no more booting.

share|improve this question
    
Ok, so if your disks have failed you need get them replaced, if that has broken your RAID array (if you have one) you will need to restore from backup, you have one right? –  Sam Aug 27 '10 at 9:53
    
...so? How can we help you? –  Massimo Jan 18 '11 at 1:58
    
Right now we just cannot boot, is there any way we can fix the raid and boot with the working drives or is there any troubleshoot guides you can recommend, please. Restoration is not the best option for now, we want to be able to fix the server with the existing drives or at least boot with the working drives. –  Sysad Jan 18 '11 at 1:58
    
It depends on your RAID configuration. If you have a RAID 5 array and two drives failed, you're in Big Troubles. The same applies if you have two RAID 1 arrays and two drives failes on the same one. –  Massimo Jan 18 '11 at 1:58
    
We want to verify if the drives are still OK but if we put them on another server, it asks us if we want to import foreign configuration. What would be the consequences if we say yes and go ahead? Massimo, what level of trouble can you clarify please. We need to what's possible and not possible in that state. Thanks. –  Sysad Jan 18 '11 at 1:58

2 Answers 2

It might possibly be that the RAID controller battery is dead, and the configuration has been lost. Some poweredge systems I've worked with in the can reload the configuration from disk when that happens, but I've not seen that option for some time.

Firstly, you need to be prepared to rebuild the system from your backups.

Is the server covered by a warranty? If so, you should call Dell before you do anything.

Do you have any physical disk failures? Does the physical disk configuration look right?

Bear in mind when looking at the RAID controller configuration, one incorrect keypress could potentially ruin any chance you have of booting the system again.

share|improve this answer
1  
+1 for "one incorrect keypress could potentially ruin any chance you have of booting the system again." –  splattne Aug 27 '10 at 10:34

Call Dell support, explain the situation. If this is a raid-5, a re-tag might work, they'll also take care of the memory issue - those are fairly easy to handle.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.