Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

Right then we've got a massive rack cabinet in our server room, it currently houses a few large servers and a giant UPS, the servers are very large so are supported by the rails at the front and rear of the cabinet, I believe they're on sliders.

I want to add another server to the cabinet, this time a 1U (perhaps a 2U at a stretch), I've looked at our old smaller cabinet and our gigabit netgear switch which is being hung by it's 'ears' is sagging quite a bit.

So here's my question, If I was looking at getting a rackmount case like this, what would I need to hang it by the rails at the back and front of the cabinet.

Cheers, Ben

share|improve this question

2 Answers 2

up vote 3 down vote accepted

X-Case RM100-E 1U black ATX Dual Xeon Server Rackmount Chassis with rail kit and 4 cooling fans -

That server should include rails; most rails attach to the front and back posts in the rack, the server slides in so the server should be fully supported.

You could get a rack-mountable 'table' (for lack of a better description) for the switch.

share|improve this answer
    
Good catch with the rail kit :) Depending on the size and especially the weight of the switch, this hanging down is ok. If not, I prefer generic mounting rails, as they don't need 1U of space by themselves. –  Sven Sep 3 '10 at 9:09
    
Ah right I understand, so it should everything to hang it up at both ends :D cheers! –  Ben Everard Sep 3 '10 at 9:43

First, if you can put the server directly on top of one of the large servers, it's OK to let the 1U server lean on the big one a bit. This way, a front mount is enough.

Other than that, you need mounting rails for this case. They should come with the case even if they are not listed, but you should check that.

These rails will be fixed to the side of the case and in most cases, they can be used to pull the server half out of the rack to service it.

Two other alternative are "generic" mounting rails (basically two L shaped metal pieces fixed on the front and the back of the rack) or shelve boards for the rack. The latter have the problem that they will eat 1U of space by themselve.

share|improve this answer
    
No, it's not OK at all. Maintenance on the 1U server involves risking breaking your legs if you pull it out too far, and the "big server" below the 1U could possibly be harder to maintenance if the 1U server grabs something while pulling it out. –  pauska Sep 3 '10 at 9:09
    
Of course you are right and I should have put that option last instead of first, but nevertheless, if you know what you are doing, I still consider it acceptable when having no other option. –  Sven Sep 3 '10 at 9:38

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.