Server Fault is a question and answer site for system and network administrators. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

I need to connect some Dell servers to a WTI TSM-40 serial port console. The serial console uses RJ45 connectors, and the Dells have DB9. I have DB9-RJ45 adapters (the ones you can customize with whatever pin layout you need).

So the question is this: Is there a recommended way to hook these up? Should I get straight-through serial cables and handle the null-ing inside of the adapter, or setup the adapters as straight-through, and get crossover serial cables?

This delves into the arcane world of serial and telecom equipment and things like DTE/DCE, which I'm not that familiar with. Are there any standards for this sort of thing? I've noticed that Monoprice seems to distinguish straight-through cables as used for data and crossover cables for voice.

P.S. Dells are running Linux and this is for a serial console on them.

share|improve this question

I highly recommend the Yost Serial Device Wiring Standard.

From that page:

Here is a scheme which solves four of the six RS-232 hassles:

  1. All cable connectors are the same sex (male).
  2. All cable connectors are of the same type (RJ-45).
  3. There is no distinction between DTE and DCE plugs and sockets.
  4. You can mass-terminate the connector cables with a crimping tool.

The other two hassles that remain are:

  1. Baud rate matching.
  2. Flow control problems.

All of your cables are wired the same and have the same connectors.

  • No more null-modems or "null-terminal" adapters.
  • No more changing pins on cable connectors.
  • No more building special cables for each kind of hookup.
  • No more soldering or messing with pins on cables.

Be sure to see the section on conflicting RJ-45 pinouts.

share|improve this answer
Is the Yost Serial Device Wiring Standard the same thing as a "Rollover" cable? Wikipedia says that they are the same thing, but I can't always trust Wikipedia. Yost Serial Device Wiring Standard – Stefan Lasiewski Sep 20 '10 at 3:21
@Stefan: The Yost cable is the one on the left in my answer to your question (labeled "crossed"). Yes it's a "rollover" cable. Pin 1 on one end is connected to pin 8 on the other. – Dennis Williamson Sep 20 '10 at 6:22

The pinouts should be handled inside the adapter, or at least that's what we're doing. That way standard pre-crimped Cat5 can be used to provide the cable. Yes, it may involve figuring out how to tweak the adapter (I went several rounds coming up with a similar RS232 adapter for an older Liebert UPS, so I know). But it'll ease things in the long run.

share|improve this answer

Google "RS-232" and that should really tell you everything you need to know as far as standards are concerned.

share|improve this answer
What makes you think he didn't Google this already? SF exists to help provide answers, not just direct people to Google. I have 8 RS-232 adapters on my desk-- each is different and not interchangeable-- RS-232 can be arcane and non-trivial. – Stefan Lasiewski Sep 14 '10 at 22:53
You're right. I guess I should have read the question more carefully. – ultrasawblade Sep 16 '10 at 3:53

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.