Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I have a system volume in Windows Server 2008 R2 that I have shrunk to well under the size of a 40 GB SSD.

What steps should I perform to move the image to the SSD and boot from it instead?

The only complication is that the source HDD has three volumes, one that is a few MB reserved by windows, one that is about 35 GB, and one that is about 500 GB (Data volume). Clearly I only want the first two volumes on the SSD, thus, I suspect I may need to use some built in windows 2008 functionality to get them operating correctly on the new drive.

Moving the data volume to another drive to simplify matters is a possibility...

Thanks

share|improve this question

1 Answer 1

up vote 2 down vote accepted

Easy! Purchase (or use a free) disk imaging/cloning tool.

  • Install that software on another machine
  • Shut down your server, and remove the HDD
  • Shutdown the other machine, and insert both HDDs (the server disk, and the SSD)
  • Clone
  • Shutdown the other machine and put the SSD drive into the server
share|improve this answer
    
Updated the question to show a complication -- I have a large data volume on the source HDD... so imaging isn't possible (since it's 1 TB --> 40 GB). Thanks –  George W Bush Sep 22 '10 at 4:07
    
You only copy the partitions that you want. This is trivial with something like Norton Ghost or Partition Manager. Just make sure that whatever one you use is compatible with Server 2008 –  JamesRyan Sep 22 '10 at 9:30

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.