At my office, there is a Windows Server 2008 router, 192.168.16.1, which is our default gateway. This sends data through our main internet connection. This works perfectly.
192.168.16.1 also has another internet connection that is currently sitting unused. This connects to a router, 192.168.1.254 which then connects to our secondary internet connection.
I have set up Routing and Remote Access to route the 192.168.1.* range to our internal network, and I am able to ping 192.168.1.254 from my desktop that has an IP address of 192.168.16.22.
I have a very intensive upload and download task for a linux box in the same office, so I want to set up a static route so I do not tie up our main internet connection and affect my co-workers. So, my plan is to set up this box with a static route.
From the linux box, I am able to ping 192.168.1.254, but I am unable to add a static route to the destination server in our data center:
$ sudo route add -host 220.127.116.11 gw 192.168.1.254 dev eth0 SIOCADDRT: No such process
From extensive googling, this error message seems to indicate that I am unable to access 192.168.1.254 to set up a route, yet I can ping it. I attempted to add a static route to 192.168.1.254, which worked perfectly, but this did not solve the issue (as expected).
I am not advanced enough at networking to diagnose this issue further as my background is software development, not system administration. I would be very grateful for any advice given.
Thank you for your time.