Server Fault is a question and answer site for system and network administrators. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

We have VMware ESXi on several servers, how can we remotely monitor for problems with hard drives, RAM, power supply or network cards?

share|improve this question

You don't mention what make/model your servers are but if they're on the HCL then there will be some hardware alerting built right in that you can keep an eye on via VSClient or via a vCenter. Some manufacturers have extended hardware alerting drivers that they can let you have (often in a custom made installer for ESXi) which can give give you much more granular detail.

share|improve this answer

If your server has some sot of remote management you could use that, also you could use the SNMP feature of ESXi if you have the proper licensing. If you are running on newer dell servers the idrac is great.

share|improve this answer

If your running HP, you can always use insight manager.

share|improve this answer

i use pysphere with zabbix and it works great


for h in props.runtime.healthSystemRuntime.systemHealthInfo.numericSensorInfo:
            print h.currentReading

worked like charm...

System Board 9 Power Meter - Device enabled
System Board 7 Temp 25 - Normal
System Internal Expansion Board 13 Temp 24 - Normal
System Internal Expansion Board 12 Temp 23 - Normal
Power Domain 1 Temp 22 - Normal
Processor 3 Temp 21 - Normal
share|improve this answer

Am currently using HPSIM with the HPServers, and there is a nice little plugin for VCenter that will allow you to see up to date information regarding temperatures, fan speeds, power status, etc., all from within VCenter.

SIM also well send out emails or alerts when a problem is detected. For example, when a power supply fan is having an issue, or temperature is up in a zone, SIM will send me an email.

I haven't tried it it, but you should be able to set up something similar with the Alarms/Definitions/Actions section of VCenter.

Since we are largely (almost completely!) HP shop, I can't speak to other vendors gear. However, we just got seeded a Dell M1000e and some blades, so I hope to learn more about the management and monitoring of that gear really soon.

share|improve this answer

You can also use CIM to monitor ESX and ESXi. See:

share|improve this answer

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.