Take the 2-minute tour ×
Server Fault is a question and answer site for system and network administrators. It's 100% free, no registration required.

I have used the Cisco VPN client for years, and on XP it is pretty much rock solid, on Vista, not so much. You might be able to connect, but unless you set up a constant ping to something, it usually will disconnect, with this error:

Reason 442: Failed to enable Virtual Adapater

Now, most sysadmins will say, update you client - yes, I know, it hasnt mitigated the issue, ever. I have been using it on Vista since it came out, and updated my client every time a new update comes out.

I have used it where the VPN server was a Cisco PIX and a Windows Box allowing the Cisco Client to connect.

Anyone have any fixes that you can do on your client to fix this issue?

share|improve this question
    
5.0.03.0530 works, sometimes. I tried an NCP client (30 day free trial, $144 after, and it works, no issues, ever) –  ScaleOvenStove Jul 9 '09 at 21:05

8 Answers 8

up vote 1 down vote accepted

This problem has been fixed in Cisco VPN Client 5.0.03.0530. I would recommend using 5.0.04.0300 or the new version 5.0.05.0290.

share|improve this answer

Really your best bet is to use the AnyConnect client. It's my understanding that Cisco is moving away from the fat client and it's notoriously buggy on Vista.

share|improve this answer
    
i am going to try this and if it works good, this will be the solution! –  ScaleOvenStove May 1 '09 at 12:22
    
AnyConnect doesnt support ipsec. :( –  ScaleOvenStove Jul 26 '09 at 0:23
    
It can work but isn't officially supported. –  GregD Jul 26 '09 at 5:13

There is a comment thread spanning over two years on Bill Evjan's blog where people have been discussing the state of affairs with the Cisco VPN client software. As mentioned in GregD's answer, your most viable option is probably going to be AnyConnect. If that doesn't end up working for you, I recommend reading the comments on Bill's blog for other possible solutions.

share|improve this answer

I've run into this issue so often - as Joseph says, it's fixed as of 5.0.03.0530 (stupid versioning, Cisco!), and I am currently running 5.0.04.0300 with no problems.

On my personal laptop, whenever I ran into that issue, all I would have to do to fix it was disable and re-enable the wireless adapter.

Fn + F2 on my Dell Inspiron (sorry, wanted to use the < kbd > tag!)

share|improve this answer
    
+1 for the sweet tag –  Even Mien Jun 6 '09 at 21:37

I have come across the very same problem when I first installed my Cisco VPN client on my Vista box at home. I followed every step that I found on google search but nothing worked. Then I just restart everything - machine & router. I then uninstalled the client and reinstalled. It worked that time. It's crazy but that was all that I needed to do. ;-)

share|improve this answer

Random disconnects often happen if some power-saving feature is putting your network adapter to sleep (That explains why it works with constant traffic.) or if your WIFI card is trying to aggressively optimize network performance by hopping between several access points.

You can install the newest version of the deterministic network enhancer (search for citrix dneupdate), because this is what provides the "virtual adapter". Sometimes it even helps to enable UDP encapsulation...

By now I just install the ShrewSoft VPN Client when such problems come up. Although this is not a perfect solution, it is a far more efficient one than finding the cisco error. And users seem happy with it. Seems to connect faster.

share|improve this answer

Issue is that the client is unable to enable the Cisco VPN Adapter. I have been able to find a work around which is, as soon as you initiate the connection through the VPN client, in Network Connections, enable Cisco VPN Adapter. All within 5 seconds - And you will find that it will connect.

Funny enough this is under Windows XP, and not Vista - However I do not believe the symptoms differ at all across the platforms.

share|improve this answer

If you hit this question due to the error on Windows 8 and cannot even connect, try the hack here:

http://www.windows7hacker.com/index.php/2011/10/how-to-get-cisco-vpn-to-work-on-windows-8-developer-preview/

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.