Here is a network diagram of what we have so far:
We have recently added a second internet connection that gives better outbound speed for use of offsite backup for our fileserver (Mac Server). I have setup the modem/router to have dhcp off and its network to 192.168.2.* and plugged it into our office switch. At the moment its not effecting any of the existing network. To be able to use the new internet connection a computer on the network needs to manually asign its IP in the 192.168.2 range.
What I want setup is that the Mac fileserver makes any office based connections on the current network but any connections on the Mac server that is destined for the internet uses the new internet connection and not the existing one like it is doing now. The Mac server only has one network port thats plugged into the switch.
I'm assuming I need to assign another IP on the Mac server on the new network and setup some routing on the server but this is where I get stuck. Can anyone offer some help on how I go about setting the config up?