Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

This openvz box was working properly few weeks ago, and now it can't ping the outside world.

I'm not expert on networking, and I thought the initial working setup will last longer.

Another stange stuff is that web services of this VM are available from outside.

Ping network interface:

vz:/# ping 88.191.118.xxx
PING 88.191.118.xxx (88.191.118.xxx) 56(84) bytes of data.
64 bytes from 88.191.118.xxx: icmp_req=1 ttl=64 time=0.048 ms
64 bytes from 88.191.118.xxx: icmp_req=2 ttl=64 time=0.043 ms
--- 88.191.118.xxx ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 999ms
rtt min/avg/max/mdev = 0.043/0.045/0.048/0.007 ms

Ping google:

vz:/# ping 74.125.230.83
PING 74.125.230.83 (74.125.230.83) 56(84) bytes of data.
--- 74.125.230.83 ping statistics ---
4 packets transmitted, 0 received, 100% packet loss, time 3023ms

ifconfig:

vz:/# ifconfig
lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:59 errors:0 dropped:0 overruns:0 frame:0
          TX packets:59 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:5507 (5.3 KiB)  TX bytes:5507 (5.3 KiB)

venet0    Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  
          inet addr:127.0.0.1  P-t-P:127.0.0.1  Bcast:0.0.0.0  Mask:255.255.255.255
          UP BROADCAST POINTOPOINT RUNNING NOARP  MTU:1500  Metric:1
          RX packets:89 errors:0 dropped:0 overruns:0 frame:0
          TX packets:584 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:20938 (20.4 KiB)  TX bytes:395767 (386.4 KiB)

venet0:0  Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  
          inet addr:192.168.23.101  P-t-P:192.168.23.101  Bcast:0.0.0.0  Mask:255.255.255.255
          UP BROADCAST POINTOPOINT RUNNING NOARP  MTU:1500  Metric:1

Routes:

vz:/# route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
192.0.2.1       0.0.0.0         255.255.255.255 UH    0      0        0 venet0
0.0.0.0         192.0.2.1       0.0.0.0         UG    0      0        0 venet0

iptable on host:

iptables -L
Chain INPUT (policy ACCEPT)
target     prot opt source               destination         
fail2ban-ssh  tcp  --  anywhere             anywhere            multiport dports ssh 

Chain FORWARD (policy ACCEPT)
target     prot opt source               destination         

Chain OUTPUT (policy ACCEPT)
target     prot opt source               destination         

Chain fail2ban-ssh (1 references)
target     prot opt source               destination         
RETURN     all  --  anywhere             anywhere 
share|improve this question
    
This is a duplicate of superuser.com/questions/223027/… - it has been answered there –  RedGrittyBrick Dec 17 '10 at 10:03
add comment

1 Answer

up vote 1 down vote accepted

Solved: the box was rebooted 2 weeks ago, and the iptables script was not launched.

Current firewall.sh script:

sd-20628:~# more firewall.sh 
#!/bin/bash
IPTABLES='/sbin/iptables';

VZ101_WEB="192.168.23.101";

LAN="192.168.23.0/24";

WAN_IFACE="eth0";
WAN_IP="88.191.xxx.xxx";

# Flushing tables
$IPTABLES -F
$IPTABLES -X
$IPTABLES -t nat -F

# Define default policy
$IPTABLES -P INPUT DROP
$IPTABLES -P OUTPUT ACCEPT
$IPTABLES -P FORWARD ACCEPT

$IPTABLES -A INPUT -j ACCEPT -d $LAN;
$IPTABLES -A INPUT -j ACCEPT -m state --state ESTABLISHED,RELATED
$IPTABLES -A INPUT -j ACCEPT -p tcp --dport 22
$IPTABLES -A INPUT -j ACCEPT -p tcp --dport 80
$IPTABLES -A INPUT -j ACCEPT -p tcp --dport 9102
$IPTABLES -A INPUT -j ACCEPT -p icmp


# SSH in VZ access
$IPTABLES -t nat -A PREROUTING -p tcp --dport 22101 -d $WAN_IP -j DNAT --to-destination $VZ101_WEB:22
share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.