Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

We have a fiber channel san managed by two OpenSolaris 2009.06 NFS servers.

  • Server 1 is managing 3 small volumes (300GB 15K RPM drives). It's working like a charm.
  • Server 2 is managing 1 large volume of 32 drives (2TB 7200 RPM drives) RAID6. Total size is 50TB.
  • Both servers have Zpool version 14 and ZFS version 3.

The slow 50TB server was installed a few month ago and was working fine. Users filled-up 2TB. I did a small experiment (created 1000 filesystems and had 24 snapshots on each). Everything when well as far as creating, accessing the filesystems with snapshots, and NFS mounting a few of them.

When I tried destroying the 1000 filesystems, the first fs took several minutes and then failed reporting the fs was in use. I issued a system shutdown but took more than 10 minutes. I did not wait longer and shut the power off.

Now when booting, OpenSolaris hangs. The lights on the 32 drives are blinking rapidly. I left it for 24 hours - still blinking but no progress.

I booted into an system snapshot before the zpool was created and tryied importing the zpool.

pfexec zpool import bigdata

Same situation: LEDs blinking and the import hangs forever.

Dtracing the "zpool import" process shows only the ioctl system call:

dtrace -n syscall:::entry'/pid == 31337/{ @syscalls[probefunc] = count(); }'

ioctl                          2499

Is there a way to fix this? Edit: Yes. Upgrading OpenSolaris to svn_134b did the trick:

pkg publisher # shows opensolaris.org
beadm create opensolaris-updated-on-2010-12-17
beadm mount opensolaris-updated-on-2010-12-17 /mnt
pkg -R /mnt image-update
beadm unmount opensolaris-updated-on-2010-12-17
beadm activate opensolaris-updated-on-2010-12-17
init 6

Now I have zfs version 3. Bigdata zpool stays at version 14. And it's back in production!

But what was it doing with the heavy I/O access for more then 24 hours (before the software upgraded)?

share|improve this question
    
I'm upgrading to the latest OpenSolaris. Following the first part of maverick.homelinux.net/blog/?p=270 –  Aleksandr Levchuk Dec 17 '10 at 19:07
    
Somehow after the software update bigdata got mounted. It works! I still don't know what it was doing that took more than 24 hours so the question remains open. –  Aleksandr Levchuk Dec 17 '10 at 20:03
    
After the upgrade everything started working. zpool import worked quickly but most of the 1000 filesystems were there. I ran zpool destroy -r - that took about 5 seconds per fs. A script that runs all 1000 in parallel took 2 minutes to finish. –  Aleksandr Levchuk Dec 17 '10 at 23:24

2 Answers 2

up vote 3 down vote accepted

With ZFS you really want to let it manipulate the disks directly as it improves concurrency. The single 50TB disk you gave it is a choking point.

That DTrace script is only tracking syscalls. The real action happens inside the kernel and if you want to see what's consuming most of the CPU, use the 'hotkernel' script from the DTrace Toolkit.

When you import a pool, ZFS reads the config from the disk and validates it. After the pool is imported, it'll start mounting all those 1000s filesystems and snapshots that you created. This can take a while. If you had dedup enabled (which you don't since you were using snv_111), it'd take even more time since it has to load the dedup table (DDT).

Shutting down the system is never a good option, specially on OpenSolaris snv_111. You haven't posted your pool configuration (zpool status) but, if you have slog devices and they fail, you won't be able to import the pool (this has been addressed recently in Solaris 11 Express snv_151a).

My advice is that you export each of the 32 disks individually and create multiple raidz2 vdev's so you have more read/write heads. Do not create huge vdev's with >8 disks because performance will be abysmal.

If you cannot afford to have the system down for so long (most people don't), study ZFS snapshots carefully and how to replicate them to a remote server with zfs send/receive. That will allow you to quickly bring a failover server up.

share|improve this answer

'zfs import' is more or less just reading back the configuration of your vdevs (from the 'zpool.cache') directly. I'm guessing what was taking forever here to finish, was your delete transaction.

Given that ZFS is transactional, and that you removed 1000 filesystems, each with 24 snapshots you had a very intensive delete with needed to check reference pointers to 24,000 snapshots. Given the seek time of those SATA heads, and all of the tree updates that needed to be done.

share|improve this answer
    
+1 Thanks! Sounds reasonable but there is one contradiction. I was running the 1000 zfs destroy s sequentially - I did the power-off before the first destroy had the chance to finished and zfs did not know that I wanted to destroy 999 more. –  Aleksandr Levchuk Dec 17 '10 at 23:29

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.