Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I have a zoom modem that dials out initially fine when I control-c out and try and redial it hangs, how do I tell wvdial to reset the modem before dialing I searched google but could not find the right solution.

share|improve this question

1 Answer 1

[Dialer Defaults]
Modem = /dev/ttyS01
Baud = 57600
Init = ATZ
# ATZ will reset the modem before dialing
share|improve this answer
    
[Modem0] Modem = /dev/ttyS0 Baud = 115200 SetVolume = 1 Dial Command = ATDT Init1 = ATZ Init3 = ATM1L1 FlowControl = CRTSCTS Dial Attempts 4 [Dialer Defaults] Modem = /dev/ttyS0 Baud = 115200 Init1 = ATZ Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 ISDN = 0 Modem Type = Analog Modem Phone = 2090177 Phone1 = 2090545 Phone2 = 2744055 Phone3 = 2041800 Username = user Password = pass –  user65053 Dec 31 '10 at 23:56
    
I have that in there but its still not resetting. –  user65053 Dec 31 '10 at 23:58
    
can you connect to the modem with minicom and run commands ? you could do some tests to see what it may be wrong - type in a few times atz and see if it echoes back ok then try atd1233444 some phone number to see if will dial - one more thing you could is to run wvdial with the atz string wvdial atz ... look into the man page –  silviud Jan 1 '11 at 0:09

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.