Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I need to reset/recover the administrator password on a LANIER 5618 laser printer. It was probably changed by the former sysadmin and there's no documentation left. Can anybody help me with some advice?

share|improve this question
add comment

2 Answers

Another default PW for this device is "sysadm" without quotes

share|improve this answer
add comment

Try logging in as supervisor with no password. I would try these combinations before going any further:

  • administrator / password
  • administrator / administrator
  • administrator / blank

All of the above but Admin as username.

Not sure if this will be relevant with your Lanier but to reset on another model:

The system settings in the UP mode can be reset to their defaults. Use the following procedure.

  1. Press User Tools/Counter .
  2. Hold down the '#' key and then press System Settings.
  3. Press yes when the message prompts you to confirm that you want to reset the system settings.
  4. Press exit when the message tells you that the settings have been reset.
share|improve this answer
    
Thank you, I’ve got it working with a similar, but not like procedure as you suggested. The reset can be done from the printer console via an option in the service menu or directly from the web interface. On the web interface there’s no username, only a password. I found this default-password by trial and error, as you suggested. It is ‘sysadmin’ (just for the records). –  esc1729 Jan 11 '11 at 23:57
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.