Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

If I build out a Mac OSX Server install on a Mac Mini and then when it's ready for production I image the disks to an XServe, is there any reason the resulting system won't just work? Assuming I'm able to keep the same IP address are there any other issues I should be aware of? I'll be running minimal services, just AFP, SMB and Open Directory.

TMI: My Intel XServe is full of cruft. Was originally a G4 XServe running 10.3, upgraded to 10.4 then migrated to 10.5 on the Intel XServe. I'd like a clean start, but can't spare the XServe downtime while I build out the install, can I just use a Mac Mini for dev and then switch to the XServe for production.

share|improve this question
    
since they are both intel, it should work immediately assuming you're not going to utilize hardware raid, then it might get a littly messy. I'd give a shot to removing the drive from the sled and using carbon copy cloner to get the install over. –  SpacemanSpiff Jan 11 '11 at 20:24

5 Answers 5

up vote 2 down vote accepted

The only thing I know of to watch out for is the difference in network interfaces. Since en1 will be a wireless interface on the Mini, it'll be configured as such the first time you boot the Mini. If you then boot the same volume (or a clone) on an XServe, and en1 is suddenly the second physical ethernet, it can have trouble reconfiguring to match the new reality. I haven't tried this in quite a while, so I'm not sure how well Snow Leopard copes, but IIRC you used to have to blow away /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist to get it to work right. Or that may completely destroy the network setup, I haven't tried in a long time...

Do you have a Mac Pro to build the new server config on? Since those also have two (physical) ethernet ports, it'd avoid this issue entirely.

share|improve this answer

If you can use MacOS X Server 10.6, you could use the Server Migration wizard and have a clean migration over to the Intel XServe

http://images.apple.com/server/macosx/docs/Upgrading_and_Migrating_v10.6.pdf

share|improve this answer

I can't think of a reason this shouldn't work.

share|improve this answer
    
Yes it will. I've done this with OS X client no end of times and client and server OS are the same at the bottom. –  RobM Jan 11 '11 at 21:45

Actually I believe you need to set up LOM because only XServe has (had) a proper hardware. Server monitor will IMHO refuse to work without proper LOM settings

share|improve this answer

It might not work if your serial number is hardware specific but besides that I can't think of anything. It should just recognize the new hardware.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.