In my network, I have three remote locations that use different subnets then the main location. They are connected to the main location through cisco ASAs.
they are as follows:
192.168.0.1 location 1 192.168.1.1 location 2 192.168.2.1 location 3 192.168.3.1 location 4
My main location, 1, hands out IP addresses in the 192.168.0.100/199 range with some static assignments. It does not handle IP assignment for the other 3 locations... Atleast I do not see any configuration in the DHCP management console.
It was explained to me before however that my DC did handle DHCP assignment for the other 3 locations.. I don't find this possible with no obvious configuration in the management console..
I believe that the ASAs are handling the DHCP for the 3 remote locations, and using the DC as the primary DNS for lookups...
I would like to change this and have the DC handle DHCP for the 3 remote locations - however I have never setup a multiple subnet DHCP server - does anyone have any good tutorials, or advice that they can offer in this situation?