Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

We've been using T1's for years and never changed the connection to a faster Cable Modem. I am concerned about support, return to service. I cannot find in legalese Cable vs T1's FCC Regulations SLA's.

I'm very interested in what the current regulations are for returning T1 and Cable service to a business. I've not had too many issues with my T1's and when I have they've jumped on the issue immediately and stayed with it until resolved.

If I get a high speed cable modem for my business and it fails I'm wondering how I'm protected by the FCC for return to service.

share|improve this question
    
T1 is symmetrical. Is your cable service? Do you need high-speed outbound traffic? –  Dennis Williamson Jan 25 '11 at 17:05
add comment

3 Answers 3

A cable modem will typically have higher downstream and upstream bandwidth than a T1, however you should be aware of the two major differences (one of which you've already mentioned):

  1. T1 lines typically come with a very strong service level agreement (SLA), and T1 providers take these very seriously (largely due to the T1's heritage as a telecommunications service).
    Cable providers typically don't offer the same kind of uptime/availability guarantees, nor do their SLAs typically have the same kind of stiff penalties as T- or DS loops.

  2. T1 bandwidth is symmetrical, dedicated and guaranteed end-to end. Your T1 will push 1.5Mbit/sec from your router to the far end.
    Cable bandwidth is asymmetrical (typically you get a fatter download pipe), shared (multiple modems to a node, sharing the RF channels), and typically not guaranteed in your contract -- the speeds are "Up to __Mbit/sec".
    While cable companies are usually on top of quality of service/speed issues they can ignore you to a greater degree than your T1 provider could.


Add one more that Jason Berg mentioned in re: SLAs:

  1. Most T1 SLAs include things like circuit latency, packet loss & (if you're lucky) jitter limits.
    Most cable SLAs (at least in my area - NY Metro) don't even mention these things, so even though our providers are good about responding to those issues they aren't strictly obligated to.
share|improve this answer
3  
One option is to use a T1 AND a cable modem. You can use the T1 for essential services like e-mail and the cable modem for browsing. I found that the cable modem was much better for browsing. But this way, if your cable modem goes down, you can still rely on the T1. –  SLY Jan 25 '11 at 17:25
    
@SLY I typically suggest a cable modem and a DSL line (T1 lines are heinously expensive here), and whichever is faster gets to be the primary connection, with failover to the other in the event of an outage (in fact that's the configuration at my current office). –  voretaq7 Jan 25 '11 at 17:26
1  
I agree with the SLA statement, however, with the stability of today's cable infrastructure, it doesn't warrant the cost. –  DanBig Jan 25 '11 at 17:31
    
@voretaq7 That makes sense, especially if T1 lines are expensive. You're going to dramatically reduce the likelihood of an outage that way. –  SLY Jan 25 '11 at 17:31
1  
@Dan I know a number of C-level executives who agree with that mentality, then disagree immediately when there's an outage that affects them, and make their displeasure known to the "IT Guy" (me) -- hence my insistence on either redundancy or an ironclad SLA :-) –  voretaq7 Jan 25 '11 at 17:35
show 1 more comment

I don't believe you're protected by the FCC if your T1 goes down anyway. Those carriers are covered by what your state's utilities division has regulated, along with the terms of the contract of what you bought. Read the fine print on your current contract. Contact your cable vendor and ask what they have for service, SLA, and ask for the fine print that backs up what they tell you.

@Dennis makes a good point as well, although these days most cable ISPs have an upload far superior to the T1 even if its nonsymmetrical.

share|improve this answer
add comment

Can not be answered. It totally (!) depends on your contract. Even with T1 it totally depends on your contract.

THe main problem may be getting cable modem for businesses WITH a SLA.

A good combbo may be having both, and use the T1 for fallback. That said, where I am a T11 is primitive ancient like hell - you can get a SDSL with up to 8mbit in BOTH direction for quite some cheap money WITH BUSINESS SLA.

share|improve this answer
    
Really? You get good SLAs with DSL? Every SLA on DSL I've seen has nothing in the way of network latency guarantees or packet loss targets. Even the targeted uptimes are hit and miss. Maybe I'm looking in the wrong places. –  Jason Berg Jan 25 '11 at 17:19
    
SDSL, not ADSL. On a separate line used for aynthing else. Depends huighly where you are and what companies offer. US is a little "third world" in this area, with asian countries leading (appartments having 1gbit ethernet there, partially in some areas, or being unrentable). –  TomTom Jan 25 '11 at 17:21
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.